aMule Forum

English => aMule Help => Topic started by: hopinmule on June 25, 2006, 12:59:05 AM

Title: No router, but LowID errors
Post by: hopinmule on June 25, 2006, 12:59:05 AM

Hi, I'm looking for some help.  MAC user.  Cable Modem connection.  ISP says they don't block ports and I have no router or other equipment between C/M and G5.  

I've loaded Servers as per instructions, but my connections last only seconds and I get LowID errors everytime.  I've change port numbers in the aMule Preferences and seemingly out of options...

Any suggestions?

Big Thanks!!

Title: Re: No router, but LowID errors
Post by: Kry on June 25, 2006, 02:50:54 AM

Firewall?

Title: Re: No router, but LowID errors
Post by: hopinmule on June 25, 2006, 08:57:14 AM

No firewall, well none that I'm aware of. Called Comcast and they said they don't or aren't blocking any ports either.

Title: Re: No router, but LowID errors
Post by: ken on June 25, 2006, 10:22:42 AM

Start aMule and then visit http://www.amule.org/testport.php and enter your aMule TCP port.  What are the test results?

Title: Re: No router, but LowID errors
Post by: hopinmule on June 25, 2006, 05:46:36 PM

Error: TCP port 4662 is unavailable. Make sure your firewall or router is allowing/forwarding this TCP service port and your ED2K client is running (i.e. aMule, eMule).
Detailed Error Message
TCP Error 110 Connection refused

Explanation
The connection timed out, meaning the port is being blocked or incorrectly forwarded by a firewall or your computer is turned off :)


grrrrrrr ;(

Title: Re: No router, but LowID errors
Post by: Kry on June 25, 2006, 07:18:01 PM

Was aMule running?

Title: Re: No router, but LowID errors
Post by: hopinmule on June 25, 2006, 08:01:36 PM

yes.

Title: Re: No router, but LowID errors
Post by: Kry on June 25, 2006, 08:13:07 PM

Must be a firewall somewhere then.

Title: Re: No router, but LowID errors
Post by: wuischke on June 25, 2006, 08:22:23 PM

Mac OS 10 has a built-in firewall as well, please check whether it's enabled.