aMule Forum

English => aMule Help => Topic started by: summerbutterfly546 on February 15, 2008, 09:14:58 PM

Title: I have no nodes!!!HEEELLLLPPPP!!!!
Post by: summerbutterfly546 on February 15, 2008, 09:14:58 PM

The nodes link does not download any nodes. at times I get only 3 nodes. i have tried using other links too but nothing works!!! HEEELLLLPPPP!!!!

Title: Re: I have no nodes!!!HEEELLLLPPPP!!!!
Post by: Festor on February 15, 2008, 09:41:06 PM

This works

http://emule-inside.net/nodes.dat

Title: Re: I have no nodes!!!HEEELLLLPPPP!!!!
Post by: summerbutterfly546 on February 16, 2008, 06:24:36 PM

it doesn't work!

Title: Re: I have no nodes!!!HEEELLLLPPPP!!!!
Post by: Festor on February 16, 2008, 06:59:03 PM

This works, or at least on my system.

Title: Re: I have no nodes!!!HEEELLLLPPPP!!!!
Post by: summerbutterfly546 on February 17, 2008, 07:15:16 PM

i got between 50 and 70 nodes but after a few hours i get zero

Title: Re: I have no nodes!!!HEEELLLLPPPP!!!!
Post by: named on February 17, 2008, 09:06:48 PM

This seems pretty much like my situation. Could you elaborate on your setup? Firewall, ports, router, distro. If it is really the same issue, by comparing our setups we could possibly identify the source of this problem.

Title: Re: I have no nodes!!!HEEELLLLPPPP!!!!
Post by: zeno78200 on February 18, 2008, 02:48:22 PM

Quote from: summerbutterfly546 on February 17, 2008, 07:15:16 PM

i got between 50 and 70 nodes but after a few hours i get zero

I have the same problem. I installed amule-CVS on a debian etch O.S. from the vollstreckt repositories.
I use amule-daemon and the kad net is always firewalled, even if all ports are opened.

I tried to dump (tcpdump) udp packets on extended port 4665 and i noticed that packets go out and in of my pc but after some minutes (about 6-7) nodes.dat goes to 0 bytes and i have no nodes anymore. Infact, also tcpdump stops its activity and i can't see anymore packets on udp 4665 port!

If i download a new nodes.dat (http://emule-inside.net/nodes.dat) the problem still persist: some minutes with connections on udp port 4665 and then nodes to 0 bytes and no udp connections.

This is what amulecmd says for ever...

Quote

aMulecmd$ status
 > ed2k: Connesso a Razorback 3.1 [193.138.205.25:5000] con ID alto
 > Kad: Connesso (Firewalled)

This is a piece of tcpdump log...

Quote

13:40:21.813764 IP (tos 0x0, ttl  52, id 62102, offset 0, flags [DF], proto: UDP (17), length: 93) EXTIP.5600 > MYIP.4665: UDP, length 65
13:40:21.914609 IP (tos 0x0, ttl  64, id 0, offset 0, flags [DF], proto: UDP (17), length: 42) MYIP.4665 > EXTIP.6688: [udp sum ok] UDP, length 14
13:40:27.828733 IP (tos 0x0, ttl  64, id 0, offset 0, flags [DF], proto: UDP (17), length: 42)MYIP.4665 > EXTIP: [udp sum ok] UDP, length 14
13:40:33.713669 IP (tos 0x0, ttl  64, id 0, offset 0, flags [DF], proto: UDP (17), length: 34) MYIP.4665 > EXTIP.8004: [udp sum ok] UDP, length 6
13:40:33.906789 IP (tos 0x0, ttl  49, id 56967, offset 0, flags [DF], proto: UDP (17), length: 62) EXTIP.8004 > MYIP.4665: [udp sum ok] UDP, length 34
...CUT...

I don't understand what is the problem... can you help us?

Thanks!

Title: Re: I have no nodes!!!HEEELLLLPPPP!!!!
Post by: named on February 18, 2008, 07:52:15 PM

Ditto. http://forum.amule.org/index.php?topic=14338.0