aMule Forum
English => aMule News => Topic started by: Kry on October 03, 2004, 11:56:16 PM
-
Upoloading right now... hang on for links.... I'll edit this as I upload it.
Source:
aMule-2.0.0rc6.tar.bz2 (http://download.berlios.de/amule/aMule-2.0.0rc6.tar.bz2)
aMule-2.0.0rc6.tar.gz (http://download.berlios.de/amule/aMule-2.0.0rc6.tar.gz)
aMule-2.0.0rc6.zip (http://download.berlios.de/amule/aMule-2.0.0rc6.zip)
Compilation fails at Systray? Check THIS (http://www.amule.org/amule/thread.php?threadid=3627&sid=) post for the patch (made by KingFish 1 hour after release O_o :baby: )
Binnaries:
MDK 10.0: (ThePolish)
aMule-2.0.0rc6-1mdk-10.0.i586.rpm (http://download.berlios.de/amule/aMule-2.0.0rc6-1mdk-10.0.i586.rpm) (NOTE:Use wx-2.5.1 unicode from Mandrake (libwxGTK2ud-devel): Webserver will not work with this wx version: general 2.5.1 problem). Will NOT work on 10.1
MDK 10.0 Custom: (ThePolish)
aMule-2.0.0rc6-3mdk-10.0.i586.rpm (http://download.berlios.de/amule/aMule-2.0.0rc6-3mdk-10.0.i586.rpm)
libwxgtk-gtk2u_2.5_3-2.5.3-4mdk-10.0.i586.rpm (http://download.berlios.de/amule/libwxgtk-gtk2u_2.5_3-2.5.3-4mdk-10.0.i586.rpm)
(NOTE:You must use BOTH aMule and wx packages provided here, and desinstall all other previous wx and aMule packages to avoid conflict. You will have unicode and gtk2 support.-Will NOT work on 10.1-Should work on 9.2 but not tested, pliz report.
MDK 10.1: (ThePolish)
aMule-2.0.0rc6-2mdk-10.1.i586.rpm (http://download.berlios.de/amule/aMule-2.0.0rc6-2mdk-10.1.i586.rpm) (NOTE:Use wx-2.5.1 NOT unicode from Mandrake (wxGTK2.5-devel) because unicode package is broken on 10.1 :( : Webserver will not work with this wx version: general 2.5.1 problem).
MDK 10.1 Custom: (ThePolish)
aMule-2.0.0rc6-4mdk-10.1.i586.rpm (http://download.berlios.de/amule/aMule-2.0.0rc6-4mdk-10.1.i586.rpm)
libwxgtk-gtk2u_2.5_3-2.5.3-5mdk-10.1.i586.rpm (http://download.berlios.de/amule/libwxgtk-gtk2u_2.5_3-2.5.3-5mdk-10.1.i586.rpm)
(NOTE:You must use BOTH aMule and wx packages provided here, and desinstall all other previous wx and aMule packages to avoid conflict. You will have unicode and gtk2 support.
Gentoo (Ghepeu)
An eBuild can be found here (http://bugs.gentoo.org/show_bug.cgi?id=66214).
Slackware (tested on Slack 10, probably working on the others) (_Hitek__)
Gtk1, not unicode:
amule-2.0.0rc6-i486-2.tgz (http://download.berlios.de/amule/amule-2.0.0rc6-i486-2.tgz)
wxgtk-2.5.2-i486-1.tgz (http://download.berlios.de/amule/wxgtk-2.5.2-i486-1.tgz)
NOTE! New Suse packages have been uploaded as of 2004-10-05 21:21:20.
SuSE 9.1 (Osato)
Src: amule-2.0.0rc6-2suse.src.rpm (http://download.berlios.de/amule/amule-2.0.0rc6-2suse.src.rpm)
Bin: amule-2.0.0rc6-2suse.i586.rpm (http://download.berlios.de/amule/amule-2.0.0rc6-2suse.i586.rpm)
SuSE 8.2, 9.0, 9.1 (deltaHF)
8.2 aMule-2.0.0rc6-1.i586-SuSE_8.2.rpm (http://www.amule.org/dl/download.php?id=99)
9.x aMule-2.0.0rc6-1.i586-SuSE_9.rpm (http://www.amule.org/dl/download.php?id=98)
More to come....
Important notices:
* The included Crypto++ files will now be used by default, so no external Crypto++ installation is needed. To disable this default behavior, consult the configure flags.
* RC6 adds support for the Advanced corruption handling of eMule. However this has the disadvantage of your files having to be hashed again. Thus a lot of disc-bound activity is bound to ensure depending on your number of files.
* MUCH improved Mac support. It's working great, except when it hangs for a few secconds for some people, which will be fixed in next release.
-
i'm waiting.
crypto++ causes an internal compiler error on my system, so the embedded feature would be nice (unless it causes internal compiler error.. that would be bad).
or maby i should fix the problem..
-
When I run the configure script and show me a little warning:
./configure: line 12808: test: xno: unary operator expected
Regards
-
Congratulations to everyone involved. RC6 was tough. I hope we can release more often now. :)
Cheers!
-
Compiling as we speak ....
Thank you :baby:
-
Hi,
Debian package will be available on my personal repository in 24 hours : http://gunnm.org/~soda/debian
The package will be integrated in the debian's archive as soon as possible (in the week I think).
-
hi, congratulations for the new version, but i have a error when i execute make:
make[6]: Entering directory `/home/celeron/src/aMule-2.0.0rc6/src/utils/wxCas/src'
g++ -march=i686 -O2 -pipe -DUSE_EMBEDDED_CRYPTO -O2 -lpthread -o wxcas wxcas-onlinesig.o wxcas-linuxmon.o wxcas-wxcas.o wxcas-wxcasprint.o wxcas-wxcasframe.o wxcas-wxcasprefs.o wxcas-wxcascte.o wxcas-wxcaspix.o -pthread -lwx_gtk-2.4
/usr/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../libwx_gtk-2.4.so: undefined reference to `operator delete(void*)@GLIBCXX_3.4'
/usr/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../libwx_gtk-2.4.so: undefined reference to `vtable for __cxxabiv1::__vmi_class_type_info@CXXABI_1.3'
/usr/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../libwx_gtk-2.4.so: undefined reference to `operator delete[](void*)@GLIBCXX_3.4'
/usr/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../libwx_gtk-2.4.so: undefined reference to `operator new[](unsigned int)@GLIBCXX_3.4'
/usr/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../libwx_gtk-2.4.so: undefined reference to `operator new(unsigned int)@GLIBCXX_3.4'
/usr/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../libwx_gtk-2.4.so: undefined reference to `__cxa_pure_virtual@CXXABI_1.3'
/usr/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../libwx_gtk-2.4.so: undefined reference to `vtable for __cxxabiv1::__si_class_type_info@CXXABI_1.3'
/usr/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../libwx_gtk-2.4.so: undefined reference to `vtable for __cxxabiv1::__class_type_info@CXXABI_1.3'
/usr/lib/gcc/i686-pc-linux-gnu/3.4.2/../../../libwx_gtk-2.4.so: undefined reference to `__gxx_personality_v0@CXXABI_1.3'
i have installed wxgtk against GTK1, and my distro is archlinux (http://www.archlinux.org :] :] )
-
Hi!
Again many, many thx for aMule 2.0.0rc6. I'm following the cvs version since about a month and am totally stunned by its stability lately.
Just got rc6 source and compiled my version, I came upon a small bug in SysTray.cpp. Just wanted to tell here about it 'cause maybe someone else experiences it too.
Posted the patch here in the forum at http://www.amule.org/amule/thread.php?threadid=3627
-
Thanks a lot !!!!!!!!
-
celeron2002 : Very strange... it's IBC undefined objects...
try disabling wxcas if it helps, if not, is most surely your glibc version (or gcc)
WaRRio: RPM is for MDK 10.0, for 10.1 will be available tomorrow.
-
O.K. It compiled nicley but hangs on start up... :(
Initialising aMule
Userhash loaded: 736302465A0E287742E21833EB4A6F87
*** UDP socket at 4665
*** UDP socket at 4672
and nothng!
but when started as different user it fires up very well! Same thing when installed from the rpm :(
-
try moving away your ~/.eMule
-
O.K. now! Deleted my clients.met and it is working great!
-
Can I sleep now?
-
I read sometime somewhere on forums you are "a robot. bip bip". No, you can't sleep :P
-
very stable, running GTK2 aMule-2.0.0rc6 / wxGTK2.5.3 on Gentoo AMD64
Nice work!
-
Thanks again! It working nice... the new GTK2 supported GUI is looking great and now I can use hebrew!!!! Must do the translation now (I'm the translator).
BUT... the memory use is very large-- more then 60 Megs and screen refreshing after showing some menus is very slow slow and jumpy :(.
-
Originally posted by boutros
very stable, running GTK2 aMule-2.0.0rc6 / wxGTK2.5.3 on Gentoo AMD64
Nice work!
Now this is a nice thing to hear! ^^;
Anyway, good job and congrats for the dev team being soooo evil. :] :P
-
YA ! The memory leacking is large... 12 Hours up: started at 50+ Megs and now at 110+ Megs..
-
I'm getting some strange things ...
(http://plus-hoogeveen.xs4all.nl/theetjuh/aMule-2.0.0rc6.png)
9 results ... but nothing is displayed ...
And when I turn on web access aMule doesn't start anymore ...
I'm running slackware-current, with wxGTK-2.5.2 on Dropline Gnome
Anybody any sollutions ? Cause 2.0.0rc5 runs well ...
-
Originally posted by boutros
very stable, running GTK2 aMule-2.0.0rc6 / wxGTK2.5.3 on Gentoo AMD64
Nice work!
I can't find wxGTK 2.5.3 neither in portage nor in http://www.wxwidgets.org.
Did you mean wxGTK CVS version ?
With wxGTK-2.5.1-r1 (the latest in portage) amule-2.0.0rc6 crashes when switching to transfers, with the following backtrace :
OOPS! - Seems like aMule crashed.
Version is: aMule 2.0.0rc6 using wxGTK2 v2.5.1
--== BACKTRACE FOLLOWS: ==--
- ./amule(_ZN9CamuleApp16OnFatalExceptionEv+0x5a) [0x82a4aae]
[1] /usr/lib/libwx_base-2.5.so.1(wxFatalSignalHandler+0x28)
[0xb7b2e882]
[2] /lib/libpthread.so.0 [0xb7f8ad5d]
[3] [0xffffe420]
[4] /usr/lib/libwx_gtk2_core-2.5.so.1(_ZN8wxDCBase8DrawTextERK8wxStringii+0x29) [0xb7d389ed]
[5] ./amule(_ZN17CDownloadListCtrl12DrawFileItemEP4wxDCiRK6wxRectP15CtrlItem_Struct+0x1d0) [0x81790a2]
[6] ./amule(_ZN17CDownloadListCtrl10OnDrawItemEiP4wxDCRK6wxRectS4_b+0x765) [0x8177c5b]
[7] ./amule(_ZN18wxODListMainWindow7OnPaintER12wxPaintEvent+0x5d1) [0x81c4cbf]
[8] /usr/lib/libwx_base-2.5.so.1(_ZNK12wxAppConsole11HandleEventEP12wxEvtHandlerMS0_FvR7wxEventES3_+0x38) [0xb7a8e09c]
[9] /usr/lib/libwx_base-2.5.so.1(_ZN12wxEvtHandler21ProcessEventIfMatchesERK21wxEventTableEntryBasePS_R7wxEvent+0x84) [0xb7b29830]
[10] /usr/lib/libwx_base-2.5.so.1(_ZN16wxEventHashTable11HandleEventER7wxEventP12wxEvtHandler+0x1d1) [0xb7b28ddd]
[11] /usr/lib/libwx_base-2.5.so.1(_ZN12wxEvtHandler12ProcessEventER7wxEvent+0xcd) [0xb7b299b9]
[12] /usr/lib/libwx_gtk2_core-2.5.so.1(_ZN8wxWindow18GtkSendPaintEventsEv+0x195) [0xb7cb48f1]
[13] /usr/lib/libwx_gtk2_core-2.5.so.1 [0xb7cb62e9]
[14] /usr/lib/libgtk-x11-2.0.so.0(_gtk_marshal_BOOLEAN__BOXED+0xb2) [0xb7890abe]
[15] /usr/lib/libgobject-2.0.so.0(g_closure_invoke+0xa9) [0xb7673336]
[16] /usr/lib/libgobject-2.0.so.0 [0xb7686e2f]
[17] /usr/lib/libgobject-2.0.so.0(g_signal_emit_valist+0x4fb) [0xb7685b30]
[18] /usr/lib/libgobject-2.0.so.0(g_signal_emit+0x34) [0xb768612e]
[19] /usr/lib/libgtk-x11-2.0.so.0 [0xb7989df4]
[20] /usr/lib/libgtk-x11-2.0.so.0(gtk_main_do_event+0x1ce) [0xb788e119]
[21] /usr/lib/libgdk-x11-2.0.so.0 [0xb773463f]
[22] /usr/lib/libgdk-x11-2.0.so.0(gdk_window_process_all_updates+0x62) [0xb7734721]
[23] /usr/lib/libgtk-x11-2.0.so.0 [0xb781050b]
[24] /usr/lib/libglib-2.0.so.0 [0xb760ab13]
[25] /usr/lib/libglib-2.0.so.0 [0xb760ad11]
[26] /usr/lib/libglib-2.0.so.0(g_main_context_dispatch+0x94) [0xb7608e96]
[27] /usr/lib/libglib-2.0.so.0 [0xb760b241]
[28] /usr/lib/libglib-2.0.so.0(g_main_loop_run+0x15e) [0xb7609378]
[29] /usr/lib/libgtk-x11-2.0.so.0(gtk_main+0xb4) [0xb788da94]
[30] /usr/lib/libwx_gtk2_core-2.5.so.1(_ZN11wxEventLoop3RunEv+0x58) [0xb7ca3836]
[31] /usr/lib/libwx_gtk2_core-2.5.so.1(_ZN9wxAppBase8MainLoopEv+0x53) [0xb7d27039]
[32] /usr/lib/libwx_gtk2_core-2.5.so.1(_ZN9wxAppBase5OnRunEv+0x1a) [0xb7d27164]
[33] /usr/lib/libwx_base-2.5.so.1(_Z7wxEntryRiPPc+0x53) [0xb7ad1fc5]
[34] ./amule(main+0x22) [0x829f974]
[35] /lib/libc.so.6(__libc_start_main+0xc0) [0xb73e7880]
[36] ./amule(_ZNK10wxTextCtrl12GetSelectionEPlS0_+0x85) [0x8120771]
Aborted
-
Should not. Can you post a backtrace on backtraces forums?
-
Slackware (tested on Slack 10, probably working on the others)
Gtk1, not unicode:
amule-2.0.0rc6-i486-2.tgz (http://download.berlios.de/amule/amule-2.0.0rc6-i486-2.tgz)
wxgtk-2.5.2-i486-1.tgz (http://download.berlios.de/amule/wxgtk-2.5.2-i486-1.tgz)
And GTK2 ?? or with unicode ?
If build them with both and it doensn't work here ;(
-
I can't get rc6 to compile. wxGTK 2.5.2 linked to gtk2. systray, amulcmd, webserver etc. are disabled. cvs 20040924 works.
...
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -D__SYSTRAY_DISABLED__ -I/home/amule/lib/wx/include/gtk2u-2.5 -I/home/amule/include -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API -I/home/amule/include/gtk-2.0 -I/home/amule/lib/gtk-2.0/include -I/usr/X11R6/include -I/home/amule/include/atk-1.0 -I/home/amule/include/glib-2.0 -I/home/amule/lib/glib-2.0/include -I/opt/gnome/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -D__GTK2__ -march=pentium4 -O2 -mmmx -msse -mfpmath=sse -msse2 -DUSE_EMBEDDED_CRYPTO -MT amule-KadDlg.o -MD -MP -MF ".deps/amule-KadDlg.Tpo" \
-c -o amule-KadDlg.o `test -f 'KadDlg.cpp' || echo './'`KadDlg.cpp; \
then mv -f ".deps/amule-KadDlg.Tpo" ".deps/amule-KadDlg.Po"; \
else rm -f ".deps/amule-KadDlg.Tpo"; exit 1; \
fi
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -D__SYSTRAY_DISABLED__ -I/home/amule/lib/wx/include/gtk2u-2.5 -I/home/amule/include -DGTK_NO_CHECK_CASTS -D__WXGTK__ -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API -I/home/amule/include/gtk-2.0 -I/home/amule/lib/gtk-2.0/include -I/usr/X11R6/include -I/home/amule/include/atk-1.0 -I/home/amule/include/glib-2.0 -I/home/amule/lib/glib-2.0/include -I/opt/gnome/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -D__GTK2__ -march=pentium4 -O2 -mmmx -msse -mfpmath=sse -msse2 -DUSE_EMBEDDED_CRYPTO -MT amule-KnownFileList.o-MD -MP -MF ".deps/amule-KnownFileList.Tpo" \
-c -o amule-KnownFileList.o `test -f 'KnownFileList.cpp' || echo './'`KnownFileList.cpp; \
then mv -f ".deps/amule-KnownFileList.Tpo" ".deps/amule-KnownFileList.Po"; \
else rm -f ".deps/amule-KnownFileList.Tpo"; exit 1; \
fi
KnownFileList.cpp: In member function `void CKnownFileList::Save()':
KnownFileList.cpp:128: error: `Node' is not a member of type `KnownFileList'
KnownFileList.cpp:128: error: `node' undeclared (first use this function)
KnownFileList.cpp:128: error: (Each undeclared identifier is reported only once
for each function it appears in.)
KnownFileList.cpp: In member function `void CKnownFileList::Clear()':
KnownFileList.cpp:147: error: `Node' is not a member of type `KnownFileList'
KnownFileList.cpp: In member function `CKnownFile*
CKnownFileList::IsOnDuplicates(wxString, unsigned int, unsigned int) const':
KnownFileList.cpp:227: error: `Node' is not a member of type `KnownFileList'
make[4]: *** [amule-KnownFileList.o] Error 1
make[4]: Leaving directory `/home/amule/aMule-2.0.0rc6/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/amule/aMule-2.0.0rc6/src'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/amule/aMule-2.0.0rc6/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/amule/aMule-2.0.0rc6'
make: *** [all] Error 2
amule@zeus:/home/amule/aMule-2.0.0rc6>
-
Only to change a little from the don't compile messages, everything but amule-gui compiled at first try in Mandrake 10.0!!!!
-
+15.00Hrs running. It look likes a real rabbit. I think IMHO that it download much quickly than rc5.
-
IMHO too ;)
About compilation problems, bugs, etc: Please report on the proper forum!!
Bugs for bugs, help for compilation, etc
-
Originally posted by soda
Hi,
Debian package will be available on my personal repository in 24 hours : http://gunnm.org/~soda/debian
The package will be integrated in the debian's archive as soon as possible (in the week I think).
Downloaded (couldn't apt-get despite updating my sources.list) and installed soda's amule and amule-util debs - running fine so far... Thanks soda.
-
Hi folks!
When I install aMule 2.0.0rc6 on SuSE 9.1 it crashes after around one minute.
I installed it with wxGTK-2.5.1 and with wxGTK-2.4.2.
No difference.
Now I installed rc5 back. :-(
Has anyone made better experiences ?
Cheers!
Oliver
-
I have the same problems than oli33,with suse9.1 rpm.
-
nice thing!
running very smoothly with suse 9.0 (using rpm for suse 9.1)
thanx a lot!
-
Originally posted by maddeneye
Originally posted by soda
Hi,
Debian package will be available on my personal repository in 24 hours : http://gunnm.org/~soda/debian
The package will be integrated in the debian's archive as soon as possible (in the week I think).
Downloaded (couldn't apt-get despite updating my sources.list) and installed soda's amule and amule-util debs - running fine so far... Thanks soda.
Soda, please, may you tell us what to write in the aptsource list file for getting amule from your repository? It looks like thermoman will not update his repository anymore, so your repository is
the only way to get amule using apt-get for debian users.
I tried to see your web http://gunnm.org/~soda/debian but seems down.
thank you.
-
Soda, please, may you tell us what to write in the aptsource list file for getting amule from your repository? It looks like thermoman will not update his repository anymore, so your repository is
the only way to get amule using apt-get for debian users.
Hum? Appart from the official debian unstable, you mean?
-
afaik, soda is the oficial aMule Debian packager, so it should be on the official repository after 4 days of soda releasing the package. allthough he could tell better :-/
Anyway, rc7 is out, so expect new package ;) Vollstrecker is also working on debian packages, keep a look at it.
Greetings!
-
Originally posted by Kry
Soda, please, may you tell us what to write in the aptsource list file for getting amule from your repository? It looks like thermoman will not update his repository anymore, so your repository is
the only way to get amule using apt-get for debian users.
Hum? Appart from the official debian unstable, you mean?
For debian stable (woody).
-
I am using suse91 rpm with wxgtk 2.4.2 and having no problems :), dunno with wxgtk 2.5.3.