aMule Forum
Italian => Aiuto su aMule => Topic started by: sephiroth84 on March 29, 2006, 11:16:27 AM
-
Salve a tutti,
uso vector linux (distro derivata da slackware) già da un po' e non ho mai avuto problemi ora ho messo al stessa distro anche sul mio notebook e sto trovando problemi con amule...
in pratica dopo averlo compilato ed installato (./configure; make; make install;)... il mulo non ne vuole proprio sapere di partire...
se le eseguo da linea di comando mi da questo mesg:
Initialising aMule
Checking if there is an instance already running...
No other instances are running.
--------------------------------------------------------------------------------
A fatal error has occurred and aMule has crashed.
Please assist us in fixing this problem by posting the backtrace below in our
'aMule Crashes' forum and include as much information as possible regarding the
circumstances of this crash. The forum is located here:
http://forum.amule.org/board.php?boardid=67
If possible, please try to generate a real backtrace of this crash:
http://www.amule.org/wiki/index.php/Backtraces
----------------------------=| BACKTRACE FOLLOWS: |=----------------------------
Current version is: aMule 2.1.1 using wxGTK2 v2.6.2 (Unicoded)
Running on: Linux 2.6.12 i686
[2] CamuleApp::OnFatalException() in amule.cpp:1177
[3] wxFatalSignalHandler in /usr/lib/libwx_baseu-2.6.so.0[0x406605d8]
[4] ?? in /lib/libpthread.so.0 [0x40032c85]
[5] ?? in [0xffffe420]
[6] wxString::wxString(char const*, wxMBConv&, unsigned) in /usr/lib/libwx_baseu-2.6.so.0[0x4062c027]
[7] wxMsgCatalogFile::FillHash(wxMessagesHash&, wxString const&, bool) const in /usr/lib/libwx_baseu-2.6.so.0[0x4060a746]
[8] wxMsgCatalog::Load(wchar_t const*, wchar_t const*, wchar_t const*, bool) in /usr/lib/libwx_baseu-2.6.so.0[0x4060ad1f]
[9] wxLocale::AddCatalog(wchar_t const*, wxLanguage, wchar_t const*) in /usr/lib/libwx_baseu-2.6.so.0[0x4060dff1]
[10] wxLocale::AddCatalog(wchar_t const*) in /usr/lib/libwx_baseu-2.6.so.0[0x4060df55]
[11] InitLocale(wxLocale&, int) in OtherFunctions.cpp:1315
[12] CamuleApp::Localize_mule() in amule.cpp:1187
[13] CamuleApp::OnInit() in amule.cpp:609
[14] CamuleGuiApp::OnInit() in amule-gui.cpp:316
[15] wxAppConsole::CallOnInit() in app.h:87
[16] wxEntry(int&, wchar_t**) in /usr/lib/libwx_baseu-2.6.so.0[0x40606e20]
[17] wxEntry(int&, char**) in /usr/lib/libwx_baseu-2.6.so.0[0x40606f2d]
[18] main in amule-gui.cpp:143
[19] __libc_start_main in /lib/libc.so.6[0x407bf469]
[20] _start in start.S:122
--------------------------------------------------------------------------------
Aborted
probabilmente c'è qualke problema con le librerie grafiche pero' no so proprio come risolvere il problema vi prego aiutatemi...
-
Ciao,
puoi postare il backtrace (http://www.amule.org/wiki/index.php/Backtraces)? ?(
Ciao by Truzzone :)
-
ho installato il mulo sul mio eMac con sistema mac os X panther,e,dopo averlo configurato con http://www.srv1000.com/azz/server.met,lui riconosce tutti i server,ma non si riesce a connettere a nessuno,ovvero mi dice che prova la connessione,ma poi la perde immediatamente dopo.
che succede?qualcuno mi può aiutare?
-
Originally posted by tutan
ho installato il mulo sul mio eMac con sistema mac os X panther,e,dopo averlo configurato con http://www.srv1000.com/azz/server.met,lui riconosce tutti i server,ma non si riesce a connettere a nessuno,ovvero mi dice che prova la connessione,ma poi la perde immediatamente dopo.
che succede?qualcuno mi può aiutare?
Che modem/router utilizzi? ?(
Ciao by Truzzone :)
-
Originally posted by sephiroth84
Salve a tutti,
uso vector linux (distro derivata da slackware) già da un po' e non ho mai avuto problemi ora ho messo al stessa distro anche sul mio notebook e sto trovando problemi con amule...
in pratica dopo averlo compilato ed installato (./configure; make; make install;)... il mulo non ne vuole proprio sapere di partire...
se le eseguo da linea di comando mi da questo mesg:
Initialising aMule
Checking if there is an instance already running...
No other instances are running.
--------------------------------------------------------------------------------
A fatal error has occurred and aMule has crashed.
Please assist us in fixing this problem by posting the backtrace below in our
'aMule Crashes' forum and include as much information as possible regarding the
circumstances of this crash. The forum is located here:
http://forum.amule.org/board.php?boardid=67
If possible, please try to generate a real backtrace of this crash:
http://www.amule.org/wiki/index.php/Backtraces
----------------------------=| BACKTRACE FOLLOWS: |=----------------------------
Current version is: aMule 2.1.1 using wxGTK2 v2.6.2 (Unicoded)
Running on: Linux 2.6.12 i686
[2] CamuleApp::OnFatalException() in amule.cpp:1177
[3] wxFatalSignalHandler in /usr/lib/libwx_baseu-2.6.so.0[0x406605d8]
[4] ?? in /lib/libpthread.so.0 [0x40032c85]
[5] ?? in [0xffffe420]
[6] wxString::wxString(char const*, wxMBConv&, unsigned) in /usr/lib/libwx_baseu-2.6.so.0[0x4062c027]
[7] wxMsgCatalogFile::FillHash(wxMessagesHash&, wxString const&, bool) const in /usr/lib/libwx_baseu-2.6.so.0[0x4060a746]
[8] wxMsgCatalog::Load(wchar_t const*, wchar_t const*, wchar_t const*, bool) in /usr/lib/libwx_baseu-2.6.so.0[0x4060ad1f]
[9] wxLocale::AddCatalog(wchar_t const*, wxLanguage, wchar_t const*) in /usr/lib/libwx_baseu-2.6.so.0[0x4060dff1]
[10] wxLocale::AddCatalog(wchar_t const*) in /usr/lib/libwx_baseu-2.6.so.0[0x4060df55]
[11] InitLocale(wxLocale&, int) in OtherFunctions.cpp:1315
[12] CamuleApp::Localize_mule() in amule.cpp:1187
[13] CamuleApp::OnInit() in amule.cpp:609
[14] CamuleGuiApp::OnInit() in amule-gui.cpp:316
[15] wxAppConsole::CallOnInit() in app.h:87
[16] wxEntry(int&, wchar_t**) in /usr/lib/libwx_baseu-2.6.so.0[0x40606e20]
[17] wxEntry(int&, char**) in /usr/lib/libwx_baseu-2.6.so.0[0x40606f2d]
[18] main in amule-gui.cpp:143
[19] __libc_start_main in /lib/libc.so.6[0x407bf469]
[20] _start in start.S:122
--------------------------------------------------------------------------------
Aborted
probabilmente c'è qualke problema con le librerie grafiche pero' no so proprio come risolvere il problema vi prego aiutatemi...
anch'io ho un problema simile, questo è il msg che mi da amule sul terminale:
Initialising aMule
Checking if there is an instance already running...
No other instances are running.
--------------------------------------------------
Warning! You are running aMule as root.
Doing so is not recommended for security reasons,
and you are advised to run aMule as an normal
user instead.
--------------------------------------------------
Loading temp files from /mnt/dati/emule/temp.
Loading PartFile 1 of 96: ERROR: Failed to load PartFile '001.part.met'
Loading PartFile 2 of 96: ERROR: Failed to load PartFile '002.part.met'
Loading PartFile 4 of 96: ERROR: Failed to load PartFile '004.part.met'
Loading PartFile 6 of 96: ERROR: Failed to load PartFile '006.part.met'
Loading PartFile 8 of 96: ERROR: Failed to load PartFile '009.part.met'
Loading PartFile 9 of 96: ERROR: Failed to load PartFile '010.part.met'
aMule Version: aMule 2.1.0 using wxGTK2 v2.6.1 (Unicoded)
Terminated after throwing an instance of 'CSeekFailureException'
what(): SafeIO::IOFailure::SeekFailure: Failed to retrieve length of fil e: Invalid argument
backtrace:
[2] wxThreadHelperThread::~wxThreadHelperThread() in amule [0x8081d0d]
[3] wxEntry(int&, wchar_t**) in /usr/lib/libwx_baseu-2.6.so.0[0x4096b574]
[4] wxEntry(int&, char**) in /usr/lib/libwx_baseu-2.6.so.0[0x4096b5ee]
[5] CryptoPP::IteratedHashBase2, CryptoPP::HashTransformation>::~IteratedHashBase2() in amule [0x812c 56e]
[6] __libc_start_main in /lib/libc.so.6[0x40b4d3ee]
[7] __gxx_personality_v0 in amule[0x807db21]
Abortito
desktop:~#
che posso fare?
lo disinstallo?
grazie
-
Originally posted by zarkon
...
che posso fare?
lo disinstallo?
grazie
Ciao,
Inanzitutto Benvenuto :D !
L'errore in cui termina il tuo aMule è stato corretto nella versione 2.1.1, si tratta di un problema nel caricamento dei file in partizioni montate da rete...
Controlla i permessi ;)
Ciao by Truzzone :)