i got between 50 and 70 nodes but after a few hours i get zero
I have the same problem. I installed amule-CVS on a debian etch O.S. from the vollstreckt repositories.
I use amule-daemon and the kad net is always firewalled, even if all ports are opened.
I tried to dump (tcpdump) udp packets on extended port 4665 and i noticed that packets go out and in of my pc but after some minutes (about 6-7) nodes.dat goes to 0 bytes and i have no nodes anymore. Infact, also tcpdump stops its activity and i can't see anymore packets on udp 4665 port!
If i download a new nodes.dat (
http://emule-inside.net/nodes.dat) the problem still persist: some minutes with connections on udp port 4665 and then nodes to 0 bytes and no udp connections.
This is what amulecmd says for ever...
aMulecmd$ status
> ed2k: Connesso a Razorback 3.1 [193.138.205.25:5000] con ID alto
> Kad: Connesso (Firewalled)
This is a piece of tcpdump log...
13:40:21.813764 IP (tos 0x0, ttl 52, id 62102, offset 0, flags [DF], proto: UDP (17), length: 93) EXTIP.5600 > MYIP.4665: UDP, length 65
13:40:21.914609 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 42) MYIP.4665 > EXTIP.6688: [udp sum ok] UDP, length 14
13:40:27.828733 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 42)MYIP.4665 > EXTIP: [udp sum ok] UDP, length 14
13:40:33.713669 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 34) MYIP.4665 > EXTIP.8004: [udp sum ok] UDP, length 6
13:40:33.906789 IP (tos 0x0, ttl 49, id 56967, offset 0, flags [DF], proto: UDP (17), length: 62) EXTIP.8004 > MYIP.4665: [udp sum ok] UDP, length 34
...CUT...
I don't understand what is the problem... can you help us?
Thanks!