aMule Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

We're back! (IN POG FORM)

Author Topic: amulecmd: connection failed.  (Read 4898 times)

vedran

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 6
amulecmd: connection failed.
« on: April 07, 2005, 06:19:07 PM »
greetings!

i run Debian linux but without root privileges or X, and i've been able to compile amulecmd (thanks to Stefanero), and there is a problem running it.

it asks for a remote host, and a password, and by default uses localhost.localdomain:4712 (?)..

so, i get this:

Creating client...
Now, doing connection....
Using host 'localhost.localdomain' port:4712
Trying to connect (timeout = 10 sec)...
Connection Failed. Unable to connect to the specified host

i tried using 4662 or 4661 or 4672, or even 80, but it's the same (except at 80, it doesn't report the error, it simply times out)
i DON'T think this is some firewall issue, because i can normally run edonkeyclc for example, which opens port 4662 successfully, without root privileges..
only, edonkeyclc is a little... well i wouldn't like to be rude.. :) i'd only rather like to have amule running.

also, when this port is open (i.e. edonkeyclc running in a screen), i get this output when trying to run amulecmd on port 4662:

Creating client...
Now, doing connection....
Using host 'localhost.localdomain' port:4662
Trying to connect (timeout = 10 sec)...
ECSocket::ReadBuffer error The socket is non-blocking and the operation would block
A socket error occured during authentication. Exiting.

it doesn't seem logical.. BUT, i'm not remotely a linux expert, so things could be simple..

if anyone can help me with this, i'd appreciate it greatly!

thanks in advance!
« Last Edit: April 07, 2005, 06:20:16 PM by vedran »
Logged

stefanero

  • Some Support
  • Developer
  • Hero Member
  • *****
  • Karma: 8
  • Offline Offline
  • Posts: 4235
Re: amulecmd: connection failed.
« Reply #1 on: April 07, 2005, 07:44:20 PM »
did you enable external connections in the .eMUle file?

did you read the howto for webserver? the setup is the same for amulecmd
check http://wiki.amule.org
Logged
In its default setup, Windows XP on the Internet amounts to a car
parked in a bad part of town, with the doors unlocked, the key in
the ignition and a Post-It note on the dashboard saying, "Please
don't steal this."

GonoszTopi

  • The current man in charge of most things.
  • Administrator
  • Hero Member
  • *****
  • Karma: 169
  • Offline Offline
  • Posts: 2685
Re: amulecmd: connection failed.
« Reply #2 on: April 07, 2005, 08:34:06 PM »
Was amule or amuled running (on the same machine) when you tried amulecmd?
Logged
concordia cum veritate

vedran

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 6
Re: amulecmd: connection failed.
« Reply #3 on: April 07, 2005, 09:46:15 PM »
Quote
did you enable external connections in the .eMUle file?

no. and that is because the only thing i have is a 500kb binary amulecmd, i had make compile this only, since i don't need (have) a GUI..
i suppost all the config files will go to a ~/.aMule dir or something, but that is probably created the first time amule actually runs..

i put the binary in my ~/local/bin, but it runs with ./amulecmd just as well anywhere else and i don't see how it's gonna know where to look for config files... but then again, it may just know..

maybe i could create the file? this .eMUIe..
with remote connections enabled in it..
i'm really at a loss.

neither amule nor amuled were running, since i don't even have these binaries.. + none of the other users were running it either.
« Last Edit: April 07, 2005, 09:47:56 PM by vedran »
Logged

vedran

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 6
Re: amulecmd: connection failed.
« Reply #4 on: April 07, 2005, 10:00:27 PM »
i created ~/.eMule with this in it:

[ExternalConnect]
AcceptExternalConnections=1
ECUseTCPPort=1

but still the same.. unable to connect to specified host (localhost.localdomaim), to any port.
Logged

GonoszTopi

  • The current man in charge of most things.
  • Administrator
  • Hero Member
  • *****
  • Karma: 169
  • Offline Offline
  • Posts: 2685
Re: amulecmd: connection failed.
« Reply #5 on: April 07, 2005, 10:09:09 PM »
Well, amulecmd is a remote control for a running amule or amuled. If you don't have/need GUI, then you can configure with --disable-monolithic --enable-amule-daemon --enable-amulecmd. Then you need to start amuled (the daemon version of aMule), and then you can connect to it with amulecmd.

Browse the wiki for more help.
Logged
concordia cum veritate

vedran

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 6
Re: amulecmd: connection failed.
« Reply #6 on: April 07, 2005, 10:38:55 PM »
yes, i must have gotten things wrong..
but anyway, amuled won't compile, and really i hate to be such a bore, but here's what he says:

if g++ -DHAVE_CONFIG_H -I. -I. -I..    -I/home/vvekic/local/lib/wx/include/base-2.4 -I/home/vvekic/local/include -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DwxUSE_GUI=0 -DAMULE_DAEMON  -DUSE_EMBEDDED_CRYPTO -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0   -MT amuled-AICHSyncThread.o -MD -MP -MF ".deps/amuled-AICHSyncThread.Tpo" \
  -c -o amuled-AICHSyncThread.o `test -f 'AICHSyncThread.cpp' || echo './'`AICHSyncThread.cpp; \
then mv -f ".deps/amuled-AICHSyncThread.Tpo" ".deps/amuled-AICHSyncThread.Po"; \
else rm -f ".deps/amuled-AICHSyncThread.Tpo"; exit 1; \
fi
In file included from AICHSyncThread.cpp:37:
amule.h:161: error: parse error before `{' token
amule.h:164: error: destructors must be member functions
amule.h:164: error: virtual outside class declaration
amule.h:166: error: virtual outside class declaration
amule.h:172: error: virtual outside class declaration
amule.h:174: error: virtual outside class declaration
amule.h:174: error: function `void NotifyEvent(const GUIEvent&)' is initialized like a variable
amule.h:175: error: virtual outside class declaration
amule.h:175: error: function `void ShowAlert(wxString, wxString, int)' is initialized like a variable
amule.h:178: error: non-member function `const bool IsRunning()' cannot have `const' method qualifier
amule.h: In function `const bool IsRunning()':
amule.h:178: error: `m_app_state' undeclared (first use this function)
amule.h:178: error: (Each undeclared identifier is reported only once for each function it appears in.)
amule.h: At global scope:
amule.h:179: error: non-member function `const bool IsOnShutDown()' cannot have `const' method qualifier
amule.h:205: error: non-member function `uint32 GetPublicIP()' cannot have `const' method qualifier
amule.h:242: error: non-member function `const wxString& GetOSType()' cannot have `const' method qualifier
amule.h: In function `const wxString& GetOSType()':
amule.h:242: error: `OSType' undeclared (first use this function)
amule.h: At global scope:
amule.h:246: error: parse error before `protected'
amule.h:265: error: parse error before `}' token
amule.h:284: error: `QueuedLogLine' was not declared in this scope
amule.h:284: error: template argument 1 is invalid
amule.h:284: error: template argument 2 is invalid
amule.h:284: error: ISO C++ forbids declaration of `m_logLines' with no type
amule.h:288: error: `APPState m_app_state' used prior to declaration
amule.h:293: error: `wxString OSType' used prior to declaration
amule.h:306: error: parse error before `}' token
amule.h:432: error: base class `CamuleApp' has incomplete type
amule.h:432: warning: `class CamuleDaemonApp' has virtual functions but non-virtual destructor
AICHSyncThread.cpp: In member function `virtual void* CAICHSyncThread::Entry()':
AICHSyncThread.cpp:151: error: 'class CamuleDaemonApp' has no member named 'ConfigDir'
AICHSyncThread.cpp:195: error: 'class CamuleDaemonApp' has no member named 'sharedfiles'
AICHSyncThread.cpp:201: error: 'class CamuleDaemonApp' has no member named 'sharedfiles'
AICHSyncThread.cpp:234: error: 'class CamuleDaemonApp' has no member named 'knownfiles'
AICHSyncThread.cpp:235: error: 'class CamuleDaemonApp' has no member named 'sharedfiles'
make: *** [amuled-AICHSyncThread.o] Error 1

it may be that i'm missing some package or other, but how do i tell which?
i'm starting to accept the destiny of amule not working, but if there is any hope, pray tell...

thanks..
Logged