amule 2.3.3 svn / wxWidget 3.1.4 compiled from source / ubuntu groovy 20.10

English > Backtraces

(1/1)

iainuki:
amule from svn 2.3.3 build from source crashed on UBUNTU groovy. the pc was left downloading and not used for one hour

amule from SVN:
version 2.3.3
sha 4e8f2b3

Libraries aMule will use to build (from configure script):
wxWidgets 3.1.4 (gtk3,shared)
crypto++ 5.6.4 (in /usr)
libupnp 1.8.4
libintl system
libGeoIP system
libpng 1.6.37
libgd 2.3.0
zlib 1.2.11

> amule --version
aMule SVN compiled with wxGTK2 v3.0.5 and Boost 1.71 (OS: Linux)

Launched with gdb these are the messages on terminal:

--- Code: ---[New Thread 0x7fffe0ce3640 (LWP 117735)]
[New Thread 0x7fffcbfff640 (LWP 117736)]
[New Thread 0x7fffcb7fe640 (LWP 117737)]
[New Thread 0x7fffcaffd640 (LWP 117738)]
[Thread 0x7fffe0ce3640 (LWP 117735) exited]
2021-02-22 19:02:16: Thread 1 asincrono avviato
2021-02-22 19:02:16: Thread 2 asincrono avviato
2021-02-22 19:02:16: Thread 3 asincrono avviato
2021-02-22 19:02:16: Thread 4 asincrono avviato
[Thread 0x7ffff2c64640 (LWP 117726) exited]
[Thread 0x7fffcb7fe640 (LWP 117737) exited]

Thread 6 "amule" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7ffff0d9c640 (LWP 117730)]
--Type <RET> for more, q to quit, c to continue without paging--q
Quit
(gdb)

--- End code ---

output from bt:

--- Code: ---(gdb) bt
#0 0x00005555559548b7 in ()
#1 0x00007f00f0d9b4e0 in ()
#2 0x0000555555950acf in ()
#3 0x000055555658d620 in ()
#4 0x00007ffff0d9b600 in ()
#5 0x000055555658d620 in ()
#6 0x0000555555961b19 in ()
#7 0x0000555555c64760 in ()
#8 0x000055555658ed00 in ()
#9 0x0000000000000000 in ()
(gdb)
--- End code ---

output from bt full:

--- Code: ---(gdb) bt full
#0 0x00005555559548b7 in ()
#1 0x00007f00f0d9b4e0 in ()
#2 0x0000555555950acf in ()
#3 0x000055555658d620 in ()
#4 0x00007ffff0d9b600 in ()
#5 0x000055555658d620 in ()
#6 0x0000555555961b19 in ()
#7 0x0000555555c64760 in ()
#8 0x000055555658ed00 in ()
#9 0x0000000000000000 in ()
(gdb)
--- End code ---

output from thread bt full:

--- Code: ---(gdb) thread apply all bt

Thread 14 (Thread 0x7fffcaffd640 (LWP 117738)):
#0 0x00007ffff6b6c66f in __GI___poll (fds=0x7fffb4007170, nfds=3, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
#1 0x00007ffff0296376 in () at /usr/lib/x86_64-linux-gnu/libpulse.so.0
#2 0x00007ffff0287ac1 in pa_mainloop_poll () at /usr/lib/x86_64-linux-gnu/libpulse.so.0
#3 0x00007ffff0288143 in pa_mainloop_iterate () at /usr/lib/x86_64-linux-gnu/libpulse.so.0
#4 0x00007ffff02881f0 in pa_mainloop_run () at /usr/lib/x86_64-linux-gnu/libpulse.so.0
#5 0x00007ffff029644d in () at /usr/lib/x86_64-linux-gnu/libpulse.so.0
#6 0x00007ffff0233f5c in () at /usr/lib/x86_64-linux-gnu/pulseaudio/libpulsecommon-13.99.so
#7 0x00007ffff6c52590 in start_thread (arg=0x7fffcaffd640) at pthread_create.c:463
#8 0x00007ffff6b78223 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95

Thread 12 (Thread 0x7fffcbfff640 (LWP 117736)):
#0 futex_abstimed_wait_cancelable (private=<optimized out>, abstime=0x7fffcbffe700, clockid=-872421808, expected=0, futex_word=0x555555e745b0) at ../sysdeps/nptl/futex-internal.h:320
#1 __pthread_cond_wait_common (abstime=0x7fffcbffe700, clockid=-872421808, mutex=0x555555e74540, cond=0x555555e74588) at pthread_cond_wait.c:520
#2 __pthread_cond_timedwait (cond=0x555555e74588, mutex=0x555555e74540, abstime=0x7fffcbffe700) at pthread_cond_wait.c:656
#3 0x00007ffff71ce6ce in () at /usr/lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0
#4 0x00007ffff71cecc9 in () at /usr/lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0
#5 0x000055555592bc3b in ()
#6 0x0000555555b844d8 in ()
#7 0x0000000000000000 in ()

Thread 9 (Thread 0x7fffe14e4640 (LWP 117733)):
#0 0x0000555555961546 in ()
#1 0x00007fffe14e35c8 in ()
#2 0x000055555596189e in ()
#3 0x00007fffe14e3460 in ()
#4 0x0000000000000000 in ()

Thread 8 (Thread 0x7fffe1ce5640 (LWP 117732)):
#0 0x00007ffff6b7856e in epoll_wait (epfd=12, events=0x7fffe1ce4040, maxevents=128, timeout=-1) at ../sysdeps/unix/sysv/linux/epoll_wait.c:30
#1 0x000055555594ecbb in ()
#2 0x00007fffcc035e50 in ()
#3 0xc46796f947f6af00 in ()
#4 0x00007fffcc012bc0 in ()
#5 0x0000555555c67080 in ()
#6 0x0000555555c67318 in ()
#7 0x00007fffcc035e50 in ()
#8 0x0000555555c670b8 in ()
#9 0xc46796f947f6af00 in ()
#10 0x0000555555c67080 in ()
#11 0x0000555555be3c40 in ()
#12 0x00007fffd4001ab0 in ()
#13 0x00007fffcc035e50 in ()
#14 0x0000555555c670b8 in ()
#15 0x00007fffcc035e50 in ()
#16 0x0000555555c67080 in ()
#17 0x00007ffff7202d00 in wxEvtHandler::QueueEvent(wxEvent*) () at /usr/lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0
#18 0x00005555558bf6cb in ()
#19 0x0000555555b6fe40 in ()
#20 0x0000000000000000 in ()

Thread 7 (Thread 0x7fffe24e6640 (LWP 117731)):
#0 futex_wait_cancelable (private=<optimized out>, expected=0, futex_word=0x555555c647f8) at ../sysdeps/nptl/futex-internal.h:183
#1 __pthread_cond_wait_common (abstime=0x0, clockid=0, mutex=0x555555c64798, cond=0x555555c647d0) at pthread_cond_wait.c:508
#2 __pthread_cond_wait (cond=0x555555c647d0, mutex=0x555555c64798) at pthread_cond_wait.c:638
#3 0x00005555559519bc in ()
#4 0x0000000000000000 in ()

Thread 6 (Thread 0x7ffff0d9c640 (LWP 117730)):
#0 0x00005555559548b7 in ()
#1 0x00007f00f0d9b4e0 in ()
#2 0x0000555555950acf in ()
#3 0x000055555658d620 in ()
#4 0x00007ffff0d9b600 in ()
#5 0x000055555658d620 in ()
#6 0x0000555555961b19 in ()
#7 0x0000555555c64760 in ()
#8 0x000055555658ed00 in ()
#9 0x0000000000000000 in ()

Thread 5 (Thread 0x7ffff159d640 (LWP 117729)):
#0 0x00007ffff6b380df in __GI___clock_nanosleep (clock_id=clock_id@entry=0, flags=flags@entry=0, req=0x7ffff159c7b0, rem=0x0) at ../sysdeps/unix/sysv/linux/clock_nanosleep.c:76
#1 0x00007ffff6b3d8d7 in __GI___nanosleep (requested_time=<optimized out>, remaining=<optimized out>) at nanosleep.c:27
#2 0x00007ffff71d4240 in wxMicroSleep(unsigned long) () at /usr/lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0
#3 0x00005555557f8e5e in ()
#4 0x0000000a00000000 in ()
#5 0x0000000000000a28 in ()
#6 0x412a021100000514 in ()
#7 0x0000000ecb6060a4 in ()
#8 0x000055550000000d in ()
#9 0x000000000000000d in ()
#10 0x000000000000000e in ()
#11 0x000055555673d420 in ()
#12 0x000055555673d428 in ()
#13 0x0000000000000271 in ()
#14 0x00005555565e5310 in ()
#15 0x00005555565e5310 in ()
#16 0x00005555565e5510 in ()
#17 0x0000555556a11928 in ()
#18 0x00005555565e5310 in ()
#19 0x00005555565e5310 in ()
#20 0x00005555565e5510 in ()
#21 0x0000555556a11928 in ()
#22 0x00007fffdc0c9d30 in ()
#23 0x00007fffdc0c9d20 in ()
#24 0x00007fffdc0c9f20 in ()
#25 0x0000555556a53648 in ()
#26 0x0000000000000001 in ()
#27 0x00007fff00000000 in ()
#28 0x00007fffdc0c9f20 in ()
#29 0x0000555556a53648 in ()
#30 0x0000000000000000 in ()

Thread 3 (Thread 0x7ffff383e640 (LWP 117723)):
#0 0x00007ffff6b6c66f in __GI___poll (fds=0x555555cf6980, nfds=2, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
#1 0x00007ffff5eb071e in () at /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#2 0x00007ffff5eb0aa3 in g_main_loop_run () at /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#3 0x00007ffff590a8aa in () at /usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
#4 0x00007ffff5eda1b1 in () at /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#5 0x00007ffff6c52590 in start_thread (arg=0x7ffff383e640) at pthread_create.c:463
#6 0x00007ffff6b78223 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95

Thread 2 (Thread 0x7ffff403f640 (LWP 117722)):
#0 0x00007ffff6b6c66f in __GI___poll (fds=0x555555ce4610, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:29
#1 0x00007ffff5eb071e in () at /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#2 0x00007ffff5eb0853 in g_main_context_iteration () at /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#3 0x00007ffff5eb08a1 in () at /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#4 0x00007ffff5eda1b1 in () at /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0
#5 0x00007ffff6c52590 in start_thread (arg=0x7ffff403f640) at pthread_create.c:463
#6 0x00007ffff6b78223 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95

Thread 1 (Thread 0x7ffff4723a80 (LWP 117718)):
#0 __libc_read (nbytes=4, buf=0x7fffffffd7b4, fd=17) at ../sysdeps/unix/sysv/linux/read.c:26
#1 __libc_read (fd=17, buf=0x7fffffffd7b4, nbytes=4) at ../sysdeps/unix/sysv/linux/read.c:24
#2 0x0000555555906e80 in ()
#3 0x00007fffffffd83f in ()
#4 0x0000555555988867 in ()
#5 0x000055555713ffe8 in ()
#6 0x00007ffff6af6721 in __GI___libc_malloc (bytes=4) at malloc.c:3086
#7 0x00007fffffffd83f in ()
#8 0x00005555576c3ae0 in ()
#9 0xc46796f947f6af00 in ()
#10 0x0000000000000004 in ()
#11 0x00007fffffffd910 in ()
#12 0x00007fffffffd990 in ()
#13 0xc46796f947f6af00 in ()
#14 0x0000000000000004 in ()
#15 0x00007fffffffd910 in ()
#16 0x0000555556118600 in ()
#17 0x0000555556003b80 in ()
#18 0x00007fffffffd860 in ()
#19 0x0000555555927763 in ()
#20 0x00005555576c35f0 in ()
#21 0x0000000000000015 in ()
#22 0x0000000000000015 in ()
#23 0xc46796f947f6af00 in ()
#24 0x00007fffffffd990 in ()
#25 0x00007fffffffd910 in ()
#26 0x00007fffffffd990 in ()
#27 0xc46796f947f6af00 in ()
#28 0x00007fffffffd910 in ()
#29 0x00007fffffffda40 in ()
#30 0x0000555556118600 in ()
#31 0x0000555555925d70 in ()
#32 0x00000001ffffd910 in ()
#33 0xc46796f947f6af00 in ()
#34 0x0000555556118600 in ()
#35 0x000055555598697a in ()
#36 0x00005555571bc4b0 in ()
#37 0x0000008800000028 in ()
#38 0x000000540000008a in ()
#39 0x00007fffffffd890 in ()
#40 0x000000030000014c in ()
#41 0x00007fff00000000 in ()
#42 0x00007fffffffd990 in ()
#43 0x00007fffffffd870 in ()
#44 0x00007fffffffd850 in ()
#45 0x0000555557252740 in ()
#46 0x00007fffffffd910 in ()
#47 0x0000555556003b60 in ()
#48 0x00007fffffffd970 in ()
#49 0x00007ffff6af31fb in _int_free (av=0x555557252740, p=0x5555576c3650, have_lock=<optimized out>) at malloc.c:4375
#50 0x00005555558052ce in ()
#51 0x0000000000000000 in ()

--- End code ---

hope these are sufficent, if something is needed, just ask.

regards

GonoszTopi:

--- Quote from: iainuki on February 22, 2021, 09:46:22 PM ---amule from SVN:
version 2.3.3
sha 4e8f2b3

Libraries aMule will use to build (from configure script):
wxWidgets 3.1.4 (gtk3,shared)
crypto++ 5.6.4 (in /usr)
libupnp 1.8.4
libintl system
libGeoIP system
libpng 1.6.37
libgd 2.3.0
zlib 1.2.11

> amule --version
aMule SVN compiled with wxGTK2 v3.0.5 and Boost 1.71 (OS: Linux)

--- End quote ---

You're certainly not running the application you compiled. Your configure output shows you use wxWidgets 3.1.4 without Boost, but amule --version shows wxWidgets 3.0.5 and Boost 1.71.

Make sure to run the application you want to.

Navigation

[0] Message Index

Go to full version