aMule Forum

English => aMule Help => Topic started by: gettons on October 11, 2006, 02:22:48 PM

Title: gentoo amuled => cpu 90%
Post by: gettons on October 11, 2006, 02:22:48 PM

Hi, my configuration is the following:
athlon xp 3000+ with 1,5 gb ram and sata disks.My OS is gentoo 2006.1

I've just installed amule 2.1.2 from gentoo ebuild with

 USE="amuled gtk remote stats" emerge amule

I've ran amule and It takes 40% of cpu load.

But I've always used amuled, so I started it and nothing strange matters.

But the cpu load now is 90%:
amuled loads 90% of the cpu.
This is the top command on my linuxbox:


 5622 gettons   25   0 71668  48m 3944 S 94.7  3.2  24:21.86 amuled            
 4840 root      15   0 62456  40m 4968 S  2.0  2.6   1:58.32 X                  
    1 root      15   0  1520  540  472 S  0.0  0.0   0:01.40 init              
    2 root      34  19     0    0    0 S  0.0  0.0   0:00.06 ksoftirqd/0        
    3 root      10  -5     0    0    0 S  0.0  0.0   0:00.20 events/0          
    4 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 khelper            
    5 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 kthread            
    7 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 kblockd/0          
    8 root      20  -5     0    0    0 S  0.0  0.0   0:00.00 kacpid            
  103 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 kseriod            
  106 root      11  -5     0    0    0 S  0.0  0.0   0:00.06 khubd              
  164 root      20   0     0    0    0 S  0.0  0.0   0:00.00 pdflush            
  165 root      15   0     0    0    0 S  0.0  0.0   0:00.01 pdflush            
  166 root      15   0     0    0    0 S  0.0  0.0   0:00.00 kswapd0            
  167 root      19  -5     0    0    0 S  0.0  0.0   0:00.00 aio/0              
  168 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 cifsoplockd        
  169 root      10  -5     0    0    0 S  0.0  0.0   0:00.00 cifsdnotifyd  




Amuled takes only 40% and amuled 90%.I can't believe it!


Any suggestion?


I can remember with slackware 10.2  I had no problems with amuled!




Thanks.

Title: Re: gentoo amuled => cpu 90%
Post by: Kry on October 11, 2006, 02:46:21 PM

Quote

I can remember with slackware 10.2 I had no problems with amuled!

Do your math there.

Title: Re: gentoo amuled => cpu 90%
Post by: wardevil on October 11, 2006, 08:23:11 PM

Maybe amuled is hashing files???
Let it run for a while and look again.
Cheers....

Title: Re: gentoo amuled => cpu 90%
Post by: gettons on October 11, 2006, 08:35:26 PM

After that problems I installed from source amule 2.1.3 and the installation was fine.
I remove my ~/.aMule directory and run again amule, it takes some time to hash files and after It crashed.
So I have ran amuled for the first time and It has taken some times with high cpu load, but maybe when you launch amuled for the first time IT (  I  don't know why ) have to rehash the files.
Now the cpu seems less loaded and evrerything is fine, except sometimes, after some hours of activity amuled and amule ( of course one of the two , once at time ) crashes and It give me a backtrace.

Title: Re: gentoo amuled => cpu 90%
Post by: wardevil on October 11, 2006, 09:12:13 PM

You could help by posting the backtrace,look here (http://www.amule.org/wiki/index.php/Backtraces) for howto,in the backtraces section. (http://forum.amule.org/board.php?boardid=33&sid=)

Cheers....