aMule Forum
English => aMule Help => Topic started by: gettons on January 18, 2007, 01:45:46 AM
-
Hi to all amule users! :D
I've installed amuled onto my debianslug ( testing ) with kernel 2.6.17 and with precompiled packages form testing .
But it has a strange behaviour:
during apt-get install amuled no problem occurred.
But after sometime the amuled is working , I 've some problems beacuse of the CPU and RAM usage , IMHO.
Because sometimes when I run amulegui from my linux workstation or amulecmd I can't log in.
Usually it 's when amuled is has been working for some hours.
I've noticed that 4 amuled processes are on my machine:
I launch only once amuled with
/etc/init.d/amule-daemon start
after some seconds this is my "top" output :
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
16029 lolleus 17 0 57740 19m 1468 R 17.4 66.1 635:48.73 amuled
609 root 10 -5 0 0 0 S 6.4 0.0 375:41.54 usb-storage
17503 root 15 0 2300 676 504 R 6.4 2.3 0:00.27 top
2 root 34 19 0 0 0 R 4.6 0.0 121:54.38 ksoftirqd/0
63 root 11 -5 0 0 0 S 0.9 0.0 51:44.80 kswapd0
16033 lolleus 15 0 57740 19m 1468 D 0.9 66.1 15:53.04 amuled
1 root 15 0 1896 64 44 S 0.0 0.2 1:09.58 init
3 root 10 -5 0 0 0 S 0.0 0.0 0:02.77 events/0
4 root 10 -5 0 0 0 S 0.0 0.0 0:00.01 khelper
5 root 10 -5 0 0 0 S 0.0 0.0 0:00.25 kthread
22 root 10 -5 0 0 0 S 0.0 0.0 0:20.42 kblockd/0
24 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kseriod
64 root 20 -5 0 0 0 S 0.0 0.0 0:00.00 aio/0
193 root 25 0 0 0 0 S 0.0 0.0 0:00.98 mtdblockd
215 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 kpsmoused
526 root 10 -5 0 0 0 S 0.0 0.0 0:00.01 khubd
606 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
915 root 10 -5 0 0 0 D 0.0 0.0 0:29.31 kjournald
1093 root 12 -4 2236 0 0 S 0.0 0.0 0:00.88 udevd
1531 root 11 -5 0 0 0 S 0.0 0.0 0:00.00 kmirrord
1562 root 12 -5 0 0 0 S 0.0 0.0 6:21.05 kjournald
1624 daemon 15 0 1604 0 0 S 0.0 0.0 0:00.00 portmap
1758 root 18 0 2460 116 116 S 0.0 0.4 1:05.18 syslogd
1764 root 15 0 1448 52 52 S 0.0 0.2 0:05.97 klogd
1780 root 20 0 5148 48 48 S 0.0 0.2 0:01.68 sshd
1793 statd 21 0 2576 0 0 S 0.0 0.0 0:00.08 rpc.statd
1847 root 15 0 1444 0 0 S 0.0 0.0 0:00.01 getty
16032 lolleus 15 0 57740 19m 1468 S 0.0 66.1 0:00.75 amuled
16035 lolleus 15 0 57740 19m 1468 S 0.0 66.1 1:34.17 amuled
16093 root 16 0 2520 40 40 S 0.0 0.1 0:02.40 fcron
17477 root 15 0 0 0 0 S 0.0 0.0 0:00.23 pdflush
17493 root 18 0 0 0 0 S 0.0 0.0 0:00.01 pdflush
17497 root 15 0 9320 492 388 S 0.0 1.6 0:01.75 sshd
17499 root 15 0 2844 280 248 S 0.0 0.9 0:00.14 bash
LKG272748:~# pstree
init-+-amuled---amuled---2*[amuled]
|-events/0
|-fcron
|-getty
|-khelper
|-klogd
|-ksoftirqd/0
|-kthread-+-aio/0
| |-kblockd/0
| |-khubd
| |-2*[kjournald]
| |-kmirrord
| |-kpsmoused
| |-kseriod
| |-kswapd0
| |-2*[pdflush]
| |-scsi_eh_0
| `-usb-storage
|-mtdblockd
|-portmap
|-rpc.statd
|-sshd---sshd---bash---pstree
|-syslogd
`-udevd
I've overclocked my NSLU2 to 266Mhz :
LKG272748:~# cat /proc/cpuinfo
Processor : XScale-IXP42x Family rev 1 (v5l)
BogoMIPS : 266.24
Features : swp half fastmult edsp
CPU implementer : 0x69
CPU architecture: 5TE
CPU variant : 0x0
CPU part : 0x41f
CPU revision : 1
Cache type : undefined 5
Cache clean : undefined 5
Cache lockdown : undefined 5
Cache format : Harvard
I size : 32768
I assoc : 32
I line length : 32
I sets : 32
D size : 32768
D assoc : 32
D line length : 32
D sets : 32
Hardware : Linksys NSLU2
Revision : 0000
Serial : 0000000000000000
Also, if I can succesfully connect with amulegui to it, when I make a "search" it doesn't give me results, only if I add direct ed2k link it can get the link.
Have you the same behaviour?
Did you compiled it?
Have you the same number of processes?
Thanks in advance.
Tommy