aMule Forum
English => Backtraces => Topic started by: djtm on April 04, 2004, 12:40:34 PM
-
"
Initialising aMule
Loading preferences from /home/djtm/.aMule/preferences.ini
Config:
x1: 0 y1: 0 x2: 1016 y2: 700
split read, found : 309
srv_split read, found : 305
*** UDP socket at 9878 (chat)
*** TCP socket at 9875
*** UDP socket at 9876
No cryptkey.dat found, creating
Serverlist loaded.
* getaddrinfo(3) failed for XÄ:80
* Closing connection #0
*** reading servers
Save ServerCount = 2 /0x2/
Saved ServerCount endian = 2 /0x2/
Save ServerCount = 2 /0x2/
Saved ServerCount endian = 2 /0x2/
Loading temp files from /E/Tempz/*.part.met.
Loading 010.part.met... - filename Star Trek - Sinnlos Im Weltraum - Remulaner.mpg - Done.
Loading 001.part.met... Sharing /E/Tempz/010.part
While creating hashset for file /E/Tempz/010.part the length found is 360694096
"
...
"
OOPS! - Seems like aMule crashed
--== BACKTRACE FOLLOWS: ==--
- amule(_ZN9CamuleApp16OnFatalExceptionEv+0x42) [0x820c692]
[1] /usr/lib/libwx_gtk-2.4.so.0(wxFatalSignalHandler+0x2d)
[0x403c496d]
[2] [0xffffe420]
[3] amule(_ZN13CUpDownClient17ProcessFileStatusEPcj+0x338) [0x80e62b8]
[4] amule(_ZN16CClientReqSocket13ProcessPacketEPcjh+0x175b) [0x80ab49b]
[5] amule(_ZN16CClientReqSocket14PacketReceivedEP6Packet+0xa4) [0x80aeb24]
[6] amule(_ZN9CEMSocket9OnReceiveEi+0x214) [0x80b11e4]
[7] amule(_ZN9CamuleDlg13socketHandlerER13wxSocketEvent+0xb2) [0x820fe92]
[8] /usr/lib/libwx_gtk-2.4.so.0(_ZN12wxEvtHandler16SearchEventTableER12wxEventTableR7wxEvent+0xb7) [0x402da667]
[9] /usr/lib/libwx_gtk-2.4.so.0(_ZN12wxEvtHandler12ProcessEventER7wxEvent+0x83) [0x402da483]
[10] /usr/lib/libwx_gtk-2.4.so.0(_ZN12wxEvtHandler20ProcessPendingEventsEv+0x56) [0x402da3c6]
[11] /usr/lib/libwx_gtk-2.4.so.0(_ZN9wxAppBase20ProcessPendingEventsEv+0x61) [0x4029abc1]
[12] /usr/lib/libwx_gtk-2.4.so.0 [0x40238f84]
[13] /usr/lib/libglib-1.2.so.0 [0x40647fa0]
[14] /usr/lib/libglib-1.2.so.0 [0x4064703d]
[15] /usr/lib/libglib-1.2.so.0 [0x406474f4]
[16] /usr/lib/libglib-1.2.so.0(g_main_run+0x34) [0x40647724]
[17] /usr/lib/libgtk-1.2.so.0(gtk_main+0xb7) [0x4056dc3f]
[18] /usr/lib/libwx_gtk-2.4.so.0(_ZN5wxApp8MainLoopEv+0x19) [0x40239a79]
[19] /usr/lib/libwx_gtk-2.4.so.0(_ZN9wxAppBase5OnRunEv+0x17) [0x4029aa47]
[20] /usr/lib/libwx_gtk-2.4.so.0(_Z7wxEntryiPPc+0x25b) [0x4023a1db]
[21] amule(main+0x1b) [0x8207beb]
[22] /lib/tls/libc.so.6(__libc_start_main+0x108) [0x4102e7b8]
"
I wasn't doing _anything_.... Started it for the first time...
-
could u plz run it in gdb
-
Sorry, the problem didn't reoccur and I don't want to run aMule in gdb the whole time... or do I? :)
-
gdb doesn't hurt your amule or your sys .. no worries ;)
-
But I don't know how to use it :(
Can you give me a lil' hint?
Just some URL so I don't need to start searching...
Should I recompile with debugging symbols (using the debian package).
-
Sorry, just saw the first post ;)
Uhhummm...
Sorry....
-
Now I always get: /usr/bin/ld: cannot find -lcrypto++ when compiling, stopping the whole procedure... :(
-
don't get the compile to work. downloaded all the needed packages... including crypto++-dev and stuff. aso tried apt-get build-dep amule...
nothing helped.
ldconfig neither...
giving up... at least for now...
-
dl crypto from our dl page, untar it, make as user, make install as root & ldconfig
should work
-
it only worked after downloading, compiling, installing crypto and then adding --with-crypto-prefix=../crypto-5.1/
Something's definitely out of order (ooo) here!
Greetz
DJtm
-
also had to CFLAGS=""; CXXFLAGS=""; for a clean compile... I'VE DONE IT!!! A COMPILE... lol
-
uhmm...
it opens for 1-2 secs and then closes again:
"This GDB was configured as "i386-linux"...
(gdb) ha SIGPIPE nostop noprint pass
Signal Stop Print Pass to program Description
SIGPIPE No No Yes Broken pipe
(gdb) run
Starting program: /usr/local/bin/amule
[New Thread 1084172864 (LWP 19313)]
Initialising aMule
Loading preferences from /home/djtm/.aMule/preferences.ini
Config:
x1: 0 y1: 0 x2: 1016 y2: 696
split read, found : 309
srv_split read, found : 305
[New Thread 1100532656 (LWP 19319)]
Could not open /proc/19319/status
(gdb) bt
#0 0x411833cf in create_thread () from /lib/tls/libpthread.so.0
#1 0x4198cbb0 in ?? ()
#2 0xbffff1b0 in ?? ()
#3 0x027d0f00 in ?? ()
#4 0x411828e0 in __free_tcb () from /lib/tls/libpthread.so.0
#5 0x4118ab90 in __JCR_LIST__ () from /lib/tls/libpthread.so.0
#6 0x4118ab90 in __JCR_LIST__ () from /lib/tls/libpthread.so.0
#7 0xbffff1b0 in ?? ()
#8 0x4198cbb0 in ?? ()
#9 0x41182af8 in pthread_create@@GLIBC_2.1 () from /lib/tls/libpthread.so.0
#10 0xbffff1f8 in ?? ()
(gdb) bt full
#0 0x411833cf in create_thread () from /lib/tls/libpthread.so.0
No symbol table info available.
#1 0x4198cbb0 in ?? ()
N
o symbol table info available.
#2 0xbffff1b0 in ?? ()
No symbol table info available.
#3 0x027d0f00 in ?? ()
No symbol table info available.
#4 0x411828e0 in __free_tcb () from /lib/tls/libpthread.so.0
No symbol table info available.
#5 0x4118ab90 in __JCR_LIST__ () from /lib/tls/libpthread.so.0
No symbol table info available.
#6 0x4118ab90 in __JCR_LIST__ () from /lib/tls/libpthread.so.0
No symbol table info available.
#7 0xbffff1b0 in ?? ()
No symbol table info available.
#8 0x4198cbb0 in ?? ()
No symbol table info available.
#9 0x41182af8 in pthread_create@@GLIBC_2.1 () from /lib/tls/libpthread.so.0
No symbol table info available.
#10 0xbffff1f8 in ?? ()
No symbol table info available.
"
-
then when
I want to quit
"(gdb) quit
The program is running. Exit anyway? (y or n) n
Not confirmed."
what does that mean, I can't see any window open...!
-
aMule closes exactly after I click okay on the "the selected locale seems not to be installed on your system"-message.
I'm normally not stupid, but those are all things I don't know how to handle... sorry!
-
regenerating locales with dpkg-reconfigure locales and including the eu_ES ones did not help, but removing one of the two message pop-ups. It still doesn't show the main window. :( I'm done for the day again....