aMule Forum
English => aMule Help => Topic started by: elcamilo on April 29, 2010, 11:07:01 AM
-
Hello.
I'm in a GNOME environment and I don't like this behaviour. How can I set
a decent aMule window size?
regards
-
You mean, it doesn't remember its last window size?
Do you maybe start it with a batch that sets the window size to some fixed value?
-
You mean, it doesn't remember its last window size?
Do you maybe start it with a batch that sets the window size to some fixed value?
It doesn't remember its last window size, right!
There's no other program that is launched with aMule, if you intend this with 'batch', and also
it has this behaviour either under compiz that under metacity.
-
Which aMule version are you using? and have you tried another WM? (KDE, fluxbox, etc.)?
Regards.
-
i have the same problem! I'm on ubuntu 10.04 and i'm running aMule 2.2.6. Everytime i run it starts maximized.
how can i create a batch that sets the window size to some fixed value?
Or is there another way to fixed it?
thanks in advance
-
Which aMule version are you using? and have you tried another WM? (KDE, fluxbox, etc.)?
Regards.
I use the latest 2.2.6 aMule version under latest Ubuntu 10.04, I also try kde4(.4.3....latest!) environment and _yes_,
it always start maximized regardless of previous window size.
-
yes i think we all got the same problem... but anybody find a solution?
may anybody tell me ho to write a shell script to run aMule with prefixed height and width? Thanks
-
Can you try the SVN version?
-
Can you try the SVN version?
I would like, but Festor left us alone and I'm not able to compile.
-
It requires no magic. ;)
-
Can you try the SVN version?
I would like, but Festor left us alone and I'm not able to compile.
It requires three commands to be executed from the directory that is created when you extract the tarball:
- ./configure
- make
- make install
You may of course add some parameters like --enable-debug to the configure script (step 1).
Open the "configure" file in any text-editor and search for "Optional Features:" to find a list of the parameters you can add.
-
Open the "configure" file in any text-editor and search for "Optional Features:" to find a list of the parameters you can add.
"./configure --help" should do the trick
-
And if all else fails, read the instructions (http://wiki.amule.org/index.php/HowTo_Compile_In_Ubuntu). :)
-
Ok, I've compile latest SVN Revision 10177, and it
do NOT start maximized anymore.
(What I will need to do when another revision will be released? Do I have to
make all compile, make and makeinstall procedure by new again?)
-
(What I will need to do when another revision will be released? Do I have to
make all compile, make and makeinstall procedure by new again?)
You could copy the new revision into the same folder. This will spare yourself the compilation of things that were not changed.
But other than that: yes, you have to compile it again.
-
(What I will need to do when another revision will be released? Do I have to
make all compile, make and makeinstall procedure by new again?)
You could copy the new revision into the same folder. This will spare yourself the compilation of things that were not changed.
But other than that: yes, you have to compile it again.
Ok, now I'm able to compile aMule, thanks. Perfect....no!
My aMule SVN do not upload, there's an empty upload queue...can you answer here or do I have to
open a new thread?
-
If you look close enough, you will notice that is NOT the upload queue.
Check http://forum.amule.org/index.php?topic=17845.0 for more info.
-
If you look close enough, you will notice that is NOT the upload queue.
Check http://forum.amule.org/index.php?topic=17845.0 for more info.
oh, sorry: I was so used to...
ok, thanks.
-
I solved this problem on archlinux by setting the line StartupMinimized=0 to StartupMinimized=1 I am attaching my amule.conf and if interested in someone, just change your_name with the name of your home (are 3 lines to change).
[eMule]
AppVersion=2.2.6
Nick=http://www.aMule.org
NewVersionCheck=1
StartupMinimized=1
ConfirmExit=1
EnableTrayIcon=0
MinToTray=0
ToolTipDelay=1
VideoPlayer=totem
VideoPreviewBackupped=1
MaxDownload=400
MaxUpload=10
SlotAllocation=2
Port=4662
UDPPort=4672
UDPDisable=0
Address=
MaxSourcesPerFile=300
MaxConnections=500
ConnectToED2K=1
ConnectToKad=1
UPnPEnabled=0
UPnPTCPPort=50000
Autoconnect=1
Reconnect=1
ShowOverhead=0
RemoveDeadServer=1
DeadServerRetry=3
Serverlist=0
AddServerListFromServer=0
AddServerListFromClient=0
Scoresystem=1
SmartIdCheck=1
SafeServerConnect=0
AutoConnectStaticOnly=0
ManualHighPrio=0
ICH=1
AICHTrust=0
AddNewFilesPaused=0
DAPPref=1
PreviewPrio=0
UAPPref=1
FullChunkTransfers=1
StartNextFile=0
StartNextFileSameCat=0
CheckDiskspace=1
MinFreeDiskSpace=1
AllocateFullFile=0
IncomingDir=/home/your_name/.aMule/Incoming
TempDir=/home/your_name/.aMule/Temp
ShareHiddenFiles=0
StatGraphsInterval=3
StatsAverageMinutes=5
VariousStatisticsMaxValue=100
statsInterval=30
DownloadCapacity=300
UploadCapacity=100
MaxConnectionsPerFiveSeconds=20
FileBufferSizePref=16
QueueSizePref=50
ServerKeepAliveTimeout=0
3DDepth=5
AutoSortDownloads=0
ShowInfoOnCatTabs=1
ShowRatesOnTitle=0
VerticalToolbar=0
ShowPartFileNumber=0
SeeShare=2
IPFilterURL=
IPFilterAutoLoad=1
FilterLevel=127
FilterLanIPs=1
ParanoidFiltering=1
IPFilterSystem=0
OnlineSignature=0
OnlineSignatureUpdate=5
OSDirectory= /home/your_name/.aMule/
FilterMessages=1
FilterAllMessages=0
MessagesFromFriendsOnly=0
MessageFromValidSourcesOnly=1
FilterWordMessages=0
MessageFilter=
FilterComments=0
CommentFilter=
Language=
SplitterbarPosition=75
YourHostname=
DateTimeFormat=%A, %x, %X
AllcatType=0
ShowAllNotCats=0
SmartIdState=1
DropSlowSources=0
KadNodesUrl=http://emule-inside.net/nodes.dat
Ed2kServersUrl=http://gruk.org/server.met.gz
StatColor0=4194304
StatColor1=16761024
StatColor2=8454016
StatColor3=53760
StatColor4=32768
StatColor5=8421631
StatColor6=200
StatColor7=140
StatColor8=16750230
StatColor9=12583104
StatColor10=8454143
StatColor11=0
StatColor12=8454016
StatColor13=53760
StatColor14=32768
TableOrderingServer=0 0,
TableWidthsServer=150,140,25,150,25,40,45,60,40,40,80
TableOrderingDownload=0 0,
TableWidthsDownload=260,60,65,65,65,170,50,55,70,110,220,220
TableOrderingUploads=0 0,
TableWidthsUploads=150,275,100,60,65,60,60,110,100,100,100
TableOrderingShared=0 0,
TableWidthsShared=250,100,50,70,220,100,100,120,100,120,120,220
[Browser]
DefaultBrowser=3
CustomBrowserString=
OpenPageInTab=1
[ExternalConnect]
UseSrcSeeds=0
ShowPercent=1
ShowProgressBar=1
AcceptExternalConnections=0
ECPassword=
ECAddress=
ECPort=4712
UPnPECEnabled=0
IpFilterClients=1
IpFilterServers=1
UseSecIdent=1
[Statistics]
MaxClientVersions=0
TotalDownloadedBytes=0
TotalUploadedBytes=5394
[SkinGUIOptions]
UseSkinFiles=0
Skin=System:gnome.zip
[Razor_Preferences]
FastED2KLinksHandler=1
SRV_SPLITTER_POS=248
MAIN_X_POS=319
MAIN_Y_POS=116
MAIN_X_SIZE=800
MAIN_Y_SIZE=600
Maximized=0
[WebServer]
Enabled=0
Port=4711
UPnPWebServerEnabled=0
WebUPnPTCPPort=50001
PageRefreshTime=120
UseGzip=1
UseLowRightsUser=0
Password=
PasswordLow=
Template=litoral
[Obfuscation]
IsClientCryptLayerSupported=1
IsCryptLayerRequested=1
IsClientCryptLayerRequired=0
CryptoPaddingLenght=254
CryptoKadUDPKey=-1048519488
[Proxy]
ProxyEnableProxy=0
ProxyType=0
ProxyName=
ProxyPort=1080
ProxyEnablePassword=0
ProxyUser=
ProxyPassword=
[UserEvents]
[UserEvents/DownloadCompleted]
CoreEnabled=0
CoreCommand=
GUIEnabled=0
GUICommand=
[UserEvents/NewChatSession]
CoreEnabled=0
CoreCommand=
GUIEnabled=0
GUICommand=
[UserEvents/OutOfDiskSpace]
CoreEnabled=0
CoreCommand=
GUIEnabled=0
GUICommand=
[UserEvents/ErrorOnCompletion]
CoreEnabled=0
CoreCommand=
GUIEnabled=0
GUICommand=
[GUI]
[GUI/TransferWnd]
Splitter=445
ShowClientList=1
It works with version 2.2.6 and I hope it can help someone.
Have a nice day.
-
What exactly is your problem?