aMule Forum
English => aMule Help => Topic started by: sublist on August 04, 2004, 01:14:56 AM
-
Hi,
i installed every needed package and the newest rc5 amule but when i start amule i get following message and then nothing happens:
amule: Symbol `_ZTV10wxTextCtrl' has different size in shared object, consider re-linking
Initialising aMule
Userhash loaded: 5D5D7BDE1C0EDA62CEE8F1CEC0646F1A
*** UDP socket at 4665
*** TCP socket at 4662
*** UDP socket at 4672
Thank 4 help
Peter
-
u have 100% the wrong wxgtk rpm installed ..
check for your linux distri wx rpms, uninstall them and install the one u can find in our installation howto (+ our amule rpm).
and also search here on forum for -> _ZTV10wxTextCtrl .. a lot of threads ;)
greets
-
Greetz
-
Hi,
I am having a similar problem, although without any mention of "ZTV10wxTextCtrl". I am upgrading from 1.2.6. I have been though the "HowTo" page and made sure I had all of the files needed for an RPM installation (the only ones that actually needed upgrading were the libcrypt files). I then downloaded aMule version 2.0.0.rc5 for RH9.
It was freezing at the same stage as the original poster in this thread, so I ran it through gdb to see where it was falling over....
(gdb) r
Starting program: /usr/bin/amule
[New Thread 1085014304 (LWP 4740)]
Initialising aMule
Userhash loaded: 398907C59E0ED85D809A2F249AA96F6A
[New Thread 1096342720 (LWP 4741)]
index.htm is 0-size, not added
*** UDP socket at 4665
*** TCP socket at 4662
*** UDP socket at 4672
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 1085014304 (LWP 4740)]
0x42074245 in _int_malloc () from /lib/tls/libc.so.6
(gdb) where
#0 0x42074245 in _int_malloc () from /lib/tls/libc.so.6
#1 0x4207335b in malloc () from /lib/tls/libc.so.6
#2 0x409dae9e in operator new(unsigned) () from /usr/lib/libstdc++.so.5
#3 0x0825302c in CClientCreditsList::LoadList() ()
#4 0x082527f6 in CClientCreditsList::CClientCreditsList(CPreferences*) ()
#5 0x083987be in CamuleApp::OnInit() ()
#6 0x40234091 in wxEntry(int, char**) () from /usr/lib/libwx_gtk-2.4.so.0
#7 0x08395fd2 in main ()
#8 0x42015574 in __libc_start_main () from /lib/tls/libc.so.6
(gdb)
Thanks for any help you can give me.
Best wishes,
Hamish
-
hamish,
paste the result of:
$ rpm -qa | grep -i wx
$ ls -l /usr/bin/wx*
Cheers!
-
Phoenix,
Here's the output:
$ rpm -qa | grep -i wx
wxGTK-devel-2.4.2-1
wxGTK-2.4.2-1
wxBase-2.4.2-1
$ls -l /usr/bin/wx*
-rwxr-xr-x 1 root root 4864 Nov 28 2003 /usr/bin/wxbase-2.4-config
lrwxrwxrwx 1 root root 26 Mar 27 23:58 /usr/bin/wxbase-config -> /usr/bin/wxbase-2.4-config
-rwxr-xr-x 1 root root 397420 Jul 21 07:54 /usr/bin/wxcas
lrwxrwxrwx 1 root root 25 Mar 27 23:58 /usr/bin/wx-config -> /usr/bin/wxgtk-2.4-config
-rwxr-xr-x 1 root root 5159 Sep 21 2003 /usr/bin/wxgtk-2.4-config
Cheers,
Hamish
-
hamish,
Your wx configuration seems to be ok.
Try this:
$ mv ~/.eMule ~/.eMule.bak
$ mv ~/.aMule ~/.aMule.bak
$ amule
and see if it still locks.
Cheers!
-
hi !
i have the same problem, after udgrading amule 1.2.8 to 2.0.0rc5 i can't run amule (gui)
after gdb:
Initialising aMule
Userhash loaded: 9DCE43544C0ED7E0570F4646C8746F28
[New Thread 27130800 (LWP 2790)]
013.part is 0-size, not added
003.part is 0-size, not added
004.part is 0-size, not added
015.part is 0-size, not added
001.part is 0-size, not added
024.part is 0-size, not added
007.part is 0-size, not added
004.part is 0-size, not added
001.part is 0-size, not added
029.part is 0-size, not added
002.part is 0-size, not added
001.part is 0-size, not added
018.part is 0-size, not added
003.part is 0-size, not added
019.part is 0-size, not added
001.part is 0-size, not added
005.part is 0-size, not added
016.part is 0-size, not added
002.part is 0-size, not added
005.part is 0-size, not added
021.part is 0-size, not added
003.part is 0-size, not added
011.part is 0-size, not added
025.part is 0-size, not added
004.part is 0-size, not added
002.part is 0-size, not added
006.part is 0-size, not added
019.part is 0-size, not added
005.part is 0-size, not added
001.part is 0-size, not added
001.part is 0-size, not added
008.part is 0-size, not added
003.part is 0-size, not added
027.part is 0-size, not added
005.part is 0-size, not added
001.part is 0-size, not added
017.part is 0-size, not added
010.part is 0-size, not added
003.part is 0-size, not added
002.part is 0-size, not added
003.part is 0-size, not added
filters.txt is 0-size, not added
002.part is 0-size, not added
007.part is 0-size, not added
001.part is 0-size, not added
010.part is 0-size, not added
*** UDP socket at 4665
*** TCP socket at 4662
*** UDP socket at 4672
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -151073984 (LWP 2787)]
0x00e84cd6 in _int_malloc () from /lib/tls/libc.so.6
(gdb) where
#0 0x00e84cd6 in _int_malloc () from /lib/tls/libc.so.6
#1 0x00e8409d in malloc () from /lib/tls/libc.so.6
#2 0x008ad08e in operator new () from /usr/lib/libstdc++.so.5
#3 0x0817d363 in CClientCreditsList::LoadList ()
#4 0x0817cb3e in CClientCreditsList::CClientCreditsList ()
#5 0x082bbd18 in CamuleApp::OnInit ()
#6 0x00b82091 in wxEntry () from /usr/lib/libwx_gtk-2.4.so.0
#7 0x082b95ec in main ()
rpm -qa | grep -i wx
wxGTK-devel-2.4.2-1
wxBase-2.4.2-1
wxGTK-2.4.2-1
ls -l /usr/bin/wx*
lrwxrwxrwx 1 root root 25 Sep 14 21:11 /usr/bin/wx-config -> /usr/bin/wxgtk-2.4-config
-rwxr-xr-x 1 root root 4864 Nov 28 2003 /usr/bin/wxbase-2.4-config
lrwxrwxrwx 1 root root 26 Sep 14 21:12 /usr/bin/wxbase-config -> /usr/bin/wxbase-2.4-config
-rwxr-xr-x 1 root root 380832 Jul 21 10:28 /usr/bin/wxcas
-rwxr-xr-x 1 root root 5159 Sep 21 2003 /usr/bin/wxgtk-2.4-config
10x in advance
can i return to old version 1.2.8 without to loss my downloaded data in amule?
-
Hi Phoenix,
Thanks for your response. I ended up removing rc5 and installing 1.2.8 instead. It seems to be working fine now, although I have a LowID problem I haven't been able to fix, but that's another story!
Thanks again for your help.
Best wishes,
Hamish
-
RC6 will fix all this problems. I made some special coding today to avoid those startup crashes.