aMule Forum

English => aMule Help => Topic started by: karmacoma on October 06, 2004, 07:59:06 PM

Title: How to come back to rc5
Post by: karmacoma on October 06, 2004, 07:59:06 PM
Hi guys

I succesfully install the RPM for RC6 two days ago just to test it a little bit. It's really nice but as you mention, amulecmd and amuleweb do not work so I decided to go back to RC5.

I uninstalled then, the amule and the libwxGTK rpms. I checked the packages needed for amule rc5:

libwxbase2.4_0-2.4.2-2mdk.i586.rpm
libwxgtk-common_2.4_0-2.4.2-4mdk.i586.rpm
libwxgtk-gtk1_2.4_0-2.4.2-4mdk.i586.rpm
libcryptopp5-5.1-2mdk.i586.rpm

which were properly installed. I followed with the installation of rc5 which went fine, but when trying to run amule I got the following error:

[]$ amule
Initialising aMule
Userhash loaded: D097D3E8F20E668DC7D5A770E1316F50
*** UDP socket at 4665
*** TCP socket at 4662
*** UDP socket at 4672

OOPS! - Seems like aMule crashed
--== BACKTRACE FOLLOWS: ==--


Aborted

which I don't have a clue what t means... Any hint???

Thanks a lot!!!!
Title: Re: How to come back to rc5
Post by: Seagull on October 06, 2004, 09:40:49 PM
Move (or delete) the file .eMule.
Title: Re: How to come back to rc5
Post by: karmacoma on October 06, 2004, 10:15:57 PM
hi seagull

I already did it, same fault.....

Karmacoma
Title: Re: How to come back to rc5
Post by: jdevers on October 07, 2004, 03:33:08 AM
Same problem here, if I delete the .aMule directory it will start up but as soon as I try to download a server list it crashes out with the same error.  I have to re-delete .aMule to get it to start again, rinse and repeat forever...
Title: Re: How to come back to rc5
Post by: stefanero on October 07, 2004, 09:13:23 AM
the server.met problem is fixed in CVS already and rc7 will be out because of that and some other error really soon...

to come back to your rc5 you need to install the right wxGTK rpms, I am pretty sure the once from mdk dont work and thats why amule crashes on startup, same with SuSE and FC.

so deinstall ALL your wxGTK rpms and wxBASE whcih come from mdk, and install the once from wxWindows or our page here....
that should do the trick

stefanero
Title: Re: How to come back to rc5
Post by: karmacoma on October 07, 2004, 09:30:40 AM
Hi Stefanero!!!

First of all thanks and secondly, I think I already tried to uninstall all wx packages and install the again however I'll try again and le t you know....
Title: Re: How to come back to rc5
Post by: stefanero on October 07, 2004, 09:32:15 AM
but install the once from wxWIndows or from our page, NOT the once from mandrake!
Title: Re: How to come back to rc5
Post by: karmacoma on October 08, 2004, 09:13:35 PM
Hi

I tried uninstalling and installing the wx as well as deleting the .eMule file with the same result.....
Title: Re: How to come back to rc5
Post by: stefanero on October 08, 2004, 09:57:21 PM
alright, only thought left what I have is to move the whole .aMule folder some place else and see if taht does help.....

stefanero
Title: Re: How to come back to rc5
Post by: karmacoma on October 09, 2004, 11:03:50 AM
Hi Stefanero

Now it works, I don't understand why but it does... One question, do you know when, which release will solve this problem with amulecmd and amuleweb????

Thanks a lot
Title: Re: How to come back to rc5
Post by: stefanero on October 09, 2004, 11:43:25 AM
good thing that it worked now ;)

what you mean with problem with amulecmd and amuleweb??
Title: Re: How to come back to rc5
Post by: RedDwarf on October 09, 2004, 02:45:41 PM
amuleweb doesn't work because this RPM uses wx 2.5.1, if you compile with other version of wx amuleweb works fine....at least so fine how in rc5 ;)