aMule Forum
English => Backtraces => Topic started by: Wazp on March 13, 2005, 03:55:16 PM
-
Hello all,
Amule craches every time after a couple of hours. It was running verry good without any problems but now it craches after a couple of hours. I've got this messenge:
--------------------------------------------------------------------------------
OOPS! Houston, we have a situation: seems like aMule crashed!
Please, post these lines on the backtrace forum on http://www.amule.org/
aMule version is: 2.0.0rc8 using wxGTK1 v2.4.2
----------------------------=| BACKTRACE FOLLOWS: |=----------------------------
- CamuleApp::OnFatalException() in amule[0x82c2fcf]
[1] wxFatalSignalHandler in /usr/lib/libwx_gtk-2.4.so.0
[0x403e8f42]
[2] ?? in /lib/i686/libpthread.so.0 [0x4003396c]
[3] ?? in /lib/i686/libc.so.6 [0x40a36aa8]
[4] CClientReqSocket::ProcessExtPacket(char const*, unsigned, unsigned char) in
amule[0x813ca4b]
[5] CClientReqSocket::PacketReceived(Packet*) in amule[0x813f3ab]
[6] CEMSocket::OnReceive(int) in amule[0x814494a]
[7] CClientReqSocket::OnReceive(int) in amule[0x813f488]
[8] CEMSocket::SetDownloadLimit(unsigned) in amule[0x8144a11]
[9] CUpDownClient::SetDownloadLimit(unsigned) in amule[0x815783e]
[10] CPartFile::Process(unsigned, unsigned char) in amule[0x824324c]
[11] CDownloadQueue::Process() in amule[0x819a225]
[12] CamuleApp::OnCoreTimer(wxTimerEvent&) in amule[0x82c4e3b]
[13] wxEvtHandler::SearchEventTable(wxEventTable&, wxEvent&) in /usr/lib/libwx_g tk-2.4.so.0[0x4031ee62]
[14] wxEvtHandler::ProcessEvent(wxEvent&) in /usr/lib/libwx_gtk-2.4.so.0[0x4031e c8f]
[15] wxTimerBase::Notify() in /usr/lib/libwx_gtk-2.4.so.0[0x403aa867]
[16] timeout_callback in /usr/lib/libwx_gtk-2.4.so.0[0x402c796c]
[17] ?? in /opt/gnome/lib/libglib-1.2.so.0 [0x407fb813]
[18] ?? in /opt/gnome/lib/libglib-1.2.so.0 [0x407fa70b]
[19] ?? in /opt/gnome/lib/libglib-1.2.so.0 [0x407fad98]
[20] g_main_run in /opt/gnome/lib/libglib-1.2.so.0[0x407faed4]
[21] gtk_main in /opt/gnome/lib/libgtk-1.2.so.0[0x4070940f]
[22] wxApp::MainLoop() in /usr/lib/libwx_gtk-2.4.so.0[0x402839f2]
[23] wxAppBase::OnRun() in /usr/lib/libwx_gtk-2.4.so.0[0x402d5610]
[24] wxEntry(int, char**) in /usr/lib/libwx_gtk-2.4.so.0[0x402840cd]
[25] main in amule[0x82c7a3c]
[26] __libc_start_main in /lib/i686/libc.so.6[0x40a22d17]
[27] wxTopLevelWindowBase::GetMaxSize() const in amule[0x8130b11]
--------------------------------------------------------------------------------
Aborted
What can i to get lost of this error and get's it running stable again?
I don't know if I have to give more information but i don't know what so you can ask :)
thanks a lot,
Renzo
-
heho, should be fixed in cvs already...
if you dont like the crashes get a reachend cvs-tarball from
http://amule.hirnriss.net
stefanero
-
Ok.. So if install the newest file that i can find at the page that you have given me than it must be over?
But the downloads on that page are only for Windows, right?
I am running SuSe 9.0, are there also fixes fot that?
-
huh? whats windows???
and yes a cvs-tarball is for any LINUX...
you have to compile it yourself tho, so no rpms!
-
btw if you would have looked close, they are sorted by date...so the newest is always from today ;)
-
Aargh.. I don't know what i am doing wrong but it stil doesn't work :(
I've got this error while i am trying tot make a rpm of the newest package that i've downloaded. I've making a rpm as told on http://www.amule.org
I've got this error:
configure.in:363: error: possibly undefined macro: AC_HEADER_STDBOOL
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
I've got a lot of error's when i was trying to install it for the first time but now i only got these error and i realy don't know how i can solve it.. :(
-
Hmmm, remove line #43 from aMule-CVS.spec.
The above line means:
1) extract the tarball to a temporary location.
2) delete line 43 from aMule-CVS.spec (which says ./autogen.sh)
3) either create rpm from this directory, or repack and create rpm from modified tarball.
This should work.
-
Tomorrow CVS will work. GonoszTopi's advice is already in CVS.
Cheers!
-
Yesterday i've tryed to install the package of that day but while installing I had the following errors at the end:
make[6]: *** [cas] Error 1
make[6]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src/utils/cas'
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src/utils/cas'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src/utils'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/packages/BUILD/amule-cvs'
make: *** [all] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.42341 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.42341 (%build)
And the problem that amule is shutting down after a comple of hours and then the error that i've give in the start post is still the problem...
-
Well, you didn't post the actual error, which was just above those lines you posted.
From your post, we only know that there was an error really, but don't have the slightest idea what the might have been.
-
I'm very sorry...
Here is the problem with the lines above that...
gcc -O2 -g -march=i586 -mcpu=i686 -fmessage-length=0 -W -Wall -g -ggdb -fno-inline -D__DEBUG__ -fmessage-length=0 -lpthread -o cas cas-cas.o cas-configfile.o cas-functions.o cas-graphics.o cas-html.o cas-lines.o -L/usr/X11R6/lib -L/usr/lib -Wl,-rpath,/usr/lib -lXpm -lX11 -ljpeg -lfreetype -lpng -lz -lm -lgd
/usr/lib/gcc-lib/i586-suse-linux/3.3.1/../../../../i586-suse-linux/bin/ld: cannot find -lXpm
collect2: ld returned 1 exit status
make[6]: *** [cas] Error 1
make[6]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src/utils/cas'
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src/utils/cas'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src/utils'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/usr/src/packages/BUILD/amule-cvs/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/packages/BUILD/amule-cvs'
make: *** [all] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.55535 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.55535 (%build)
-
yast --> search --> xpm
and see what you find ;)
-
I have installed the following software packages:
- pixmp
- xpmroot
If i search files named xpm then he find:
Map XPM (/usr/share/doc/packages/WindowMaker-applets/pclock/
File xpm (/opt/gnome/lib/gimp/1.3/plug0ins/
Map xpm (/usr/X11R6/GNUstep/Apps/WPrefs.app/
-
Ok.. i have just installed 2 rpm package's and nog i've got these error:
cannot find -lX11
-
Is there nobody that can help my with this error?? I wanne download again :) :)
-
hmm xfree or xfree-devel packages?
-
I have installed that package's and now it works!! Thank you very much!!
-
:) good to know