aMule Forum
English => Backtraces => Topic started by: ulmen on March 29, 2005, 06:35:06 PM
-
(gdb) run
Starting program: /usr/bin/amuled
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1213569184 (LWP 20475)]
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
Initialising aMule
Checking if there is an instance already running...
(no debugging symbols found)
[New Thread -1215194192 (LWP 20479)]
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1215194192 (LWP 20479)]
0xb7f5c7ac in wxMutex::Lock () from /usr/lib/libwx_baseu-2.5.so.3
(gdb) bt
#0 0xb7f5c7ac in wxMutex::Lock () from /usr/lib/libwx_baseu-2.5.so.3
#1 0xb7f5e6a5 in wxEvtHandler::AddPendingEvent ()
from /usr/lib/libwx_baseu-2.5.so.3
#2 0xb7f601ea in wxPostEvent () from /usr/lib/libwx_baseu-2.5.so.3
#3 0x0816043c in wxStringTokenizer::~wxStringTokenizer ()
#4 0x080557ca in ?? ()
#5 0xb7f5abfb in wxThreadInternal::PthreadStart ()
from /usr/lib/libwx_baseu-2.5.so.3
#6 0xb7f5aacf in wxPthreadStart () from /usr/lib/libwx_baseu-2.5.so.3
#7 0xb7fd0ae0 in start_thread () from /lib/tls/i686/cmov/libpthread.so.0
#8 0xb7b79c9a in clone () from /lib/tls/i686/cmov/libc.so.6
(gdb) bt full
#0 0xb7f5c7ac in wxMutex::Lock () from /usr/lib/libwx_baseu-2.5.so.3
No symbol table info available.
#1 0xb7f5e6a5 in wxEvtHandler::AddPendingEvent ()
from /usr/lib/libwx_baseu-2.5.so.3
No symbol table info available.
#2 0xb7f601ea in wxPostEvent () from /usr/lib/libwx_baseu-2.5.so.3
No symbol table info available.
#3 0x0816043c in wxStringTokenizer::~wxStringTokenizer ()
No symbol table info available.
#4 0x080557ca in ?? ()
No symbol table info available.
#5 0xb7f5abfb in wxThreadInternal::PthreadStart ()
from /usr/lib/libwx_baseu-2.5.so.3
No symbol table info available.
#6 0xb7f5aacf in wxPthreadStart () from /usr/lib/libwx_baseu-2.5.so.3
No symbol table info available.
#7 0xb7fd0ae0 in start_thread () from /lib/tls/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb7b79c9a in clone () from /lib/tls/i686/cmov/libc.so.6
No symbol table info available.
(gdb) quit
I'm idling in the chat for further questions. Thank you.
-
I was about to post the same, here is my bt:
(gdb) run
Starting program: /usr/local/bin/amuled
warning: Unable to find dynamic linker breakpoint function.
GDB will be unable to debug shared library initializers
and track explicitly loaded dynamic code.
[Thread debugging using libthread_db enabled]
[New Thread -1213325200 (LWP 28229)]
Initialising aMule
Detaching after fork from child process 28232.
Checking if there is an instance already running...
[New Thread -1215693904 (LWP 28233)]
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1215693904 (LWP 28233)]
0xb7f7ba6c in wxMutex::Lock() () from /usr/local/lib/libwx_base-2.5.so.5
(gdb) bt
#0 0xb7f7ba6c in wxMutex::Lock() () from /usr/local/lib/libwx_base-2.5.so.5
#1 0xb7fb06f4 in ?? () from /usr/local/lib/libwx_base-2.5.so.5
#2 0xb789f898 in ?? ()
#3 0xb7f7d985 in wxEvtHandler::AddPendingEvent(wxEvent&) () from /usr/local/lib/libwx_base-2.5.so.5
Previous frame inner to this frame (corrupt stack?)
(gdb) bt full
#0 0xb7f7ba6c in wxMutex::Lock() () from /usr/local/lib/libwx_base-2.5.so.5
No symbol table info available.
#1 0xb7fb06f4 in ?? () from /usr/local/lib/libwx_base-2.5.so.5
No symbol table info available.
#2 0xb789f898 in ?? ()
No symbol table info available.
#3 0xb7f7d985 in wxEvtHandler::AddPendingEvent(wxEvent&) () from /usr/local/lib/libwx_base-2.5.so.5
No symbol table info available.
Regards--
-
(gdb) run
Starting program: /usr/bin/amuled
[Thread debugging using libthread_db enabled]
[New Thread -1208088896 (LWP 31105)]
Initialising aMule
Detaching after fork from child process 31108.
Checking if there is an instance already running...
[New Thread -1210430544 (LWP 31109)]
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1210430544 (LWP 31109)]
0x03857290 in wxMutex::Lock () from /usr/lib/libwx_baseu-2.5.so.4
(gdb) bt
#0 0x03857290 in wxMutex::Lock () from /usr/lib/libwx_baseu-2.5.so.4
#1 0x0385ac3c in wxEvtHandler::AddPendingEvent () from /usr/lib/libwx_baseu-2.5.so.4
#2 0x08057c06 in wxPostEvent (dest=0x855a9d0, event=@0xb7da4270) at event.h:2461
#3 0x0815b88c in CLogger::AddLogLine (critical=false, str=Cannot access memory at address 0x0
) at Logger.cpp:143
#4 0x08056ff5 in CAddFileThread::Entry (this=0x8744cb8) at AddFileThread.cpp:270
#5 0x03858c45 in wxThreadInternal::PthreadStart () from /usr/lib/libwx_baseu-2.5.so.4
#6 0x03858cab in wxPthreadStart () from /usr/lib/libwx_baseu-2.5.so.4
#7 0x009a13ae in start_thread () from /lib/tls/libpthread.so.0
#8 0x00820b6e in clone () from /lib/tls/libc.so.6
(gdb) bt full
#0 0x03857290 in wxMutex::Lock () from /usr/lib/libwx_baseu-2.5.so.4
No symbol table info available.
#1 0x0385ac3c in wxEvtHandler::AddPendingEvent () from /usr/lib/libwx_baseu-2.5.so.4
No symbol table info available.
#2 0x08057c06 in wxPostEvent (dest=0x855a9d0, event=@0xb7da4270) at event.h:2461
No locals.
#3 0x0815b88c in CLogger::AddLogLine (critical=false, str=Cannot access memory at address 0x0
) at Logger.cpp:143
event = {<> = {}, ID = ADDLOGLINE, byte_value = 0 '\0', short_value = 0, long_value = 0, longlong_value = 0, string_value = { = {static npos = 4294967295,
m_pchData = 0x8767794}, }, ptr_value = 0x0, ptr_aux_value = 0x0}
#4 0x08056ff5 in CAddFileThread::Entry (this=0x8744cb8) at AddFileThread.cpp:270
file = {_vptr.CFile = 0x81bd6e8, m_fd = 10, m_error = false, fFilePath = { = {static npos = 4294967295, m_pchData = 0x876744c}, }}
knownfile = (class CKnownFile *) 0x8767360
filename = { = {static npos = 4294967295, m_pchData = 0x876744c}, }
needsAICH = true
error = false
current = {m_path = { = {static npos = 4294967295, m_pchData = 0x87661bc}, }, m_name = { = {static npos = 4294967295,
m_pchData = 0x8761f44}, }, m_owner = 0x0}
evt = {<> = {}, m_ptr = 0x389ffc4, m_value = -1210432552, m_commandInt = 59077585}
#5 0x03858c45 in wxThreadInternal::PthreadStart () from /usr/lib/libwx_baseu-2.5.so.4
No symbol table info available.
#6 0x03858cab in wxPthreadStart () from /usr/lib/libwx_baseu-2.5.so.4
No symbol table info available.
#7 0x009a13ae in start_thread () from /lib/tls/libpthread.so.0
No symbol table info available.
#8 0x00820b6e in clone () from /lib/tls/libc.so.6
No symbol table info available.
-
crash after crash. Oh my gosh. 8o 8o
-
you guys read that -->
http://www.amule.org/wiki/index.php/FAQ_amuled
so make SURE udp-socket is disabled, and you have less connections then 1024...
btw: cytomatrix maybe next time post somethign usefull.....
-
Fixed ! Thanx toshi for report