aMule Forum

Portuguese => Ajuda aMule => Topic started by: Aiidoneus on May 01, 2005, 11:34:31 AM

Title: Como configurar aMule
Post by: Aiidoneus on May 01, 2005, 11:34:31 AM
Boas.

Sou novo no mundo do emule para Mac.
Sempre usei o emule no Win XP,  sem qualquer problema, até ao momento que adquiri um router Linksys sem fios e mudei completamente para um mac.

Neste momento já tentei de tudo para que o router permitisse a ligação a um server sem que fosse em lowid (infrutifero)
E ja tentei de tudo para configurar correctamente o amule (troquei o ipfilter.dat que estava dentro do package, mas cada vez que abro o programa ele da-me um erro e pergunta se quero fechar, sendo que se eu responder que quero continuar a usar ele deixa funcionar bem. De resto não sei se está tudo bem e o unico problema será do router)

Se alguém me puder ajudar

Pwease!..  :baby:
Title: Re: Como configurar aMule
Post by: geeko on May 01, 2005, 01:15:53 PM
Aiidoneus,

ja activaste a opcao de port forwarding no router?
No linksys acho k vais ate "Applications & Gaming" e dps "Port Range Forwarding"
precisas de fazer o portforward dos seguintes ports para o teu ip local (192.168.x.x):
* 4662 (tcp)
* 4665 (udp)
* 4672 (udp)

Acho k isto deve bastar :D
fica bem
geeko
Title: Re: Como configurar aMule
Post by: Aiidoneus on May 01, 2005, 01:22:33 PM
Eu n sei s trabalhas com a Airport? É k acho k eu ja vi isso aki no forum, e experimentei, so k a airport ficou toda marada, com o internet connect sempre a abrir sozinho... Posso tentar outra x..

Cumps
Title: Re: Como configurar aMule
Post by: Aiidoneus on May 01, 2005, 01:30:05 PM
Pois e acabei d tentar e ele continua a dizr :

2005-05-01 12:42:09: Connecting to Max[PT] Tejo (tejo.kicks-ass.net - 81.84.114.73:4661)
2005-05-01 12:42:09: Connected to Max[PT] Tejo (81.84.114.73:4661)
2005-05-01 12:42:24: Warning: Max[PT] Tejo (81.84.114.73:4661) - NG : You have a lowid. Please review your network config and/or your settings.
2005-05-01 12:42:24: Lost connection to Max[PT] Tejo (81.84.114.73:4661)
Title: Re: Como configurar aMule
Post by: geeko on May 01, 2005, 10:05:31 PM
Podes tirar 1 screenshot da pagina com a configuracao k tens no router do Port Range Forwarding?

geeko
Title: Re: Como configurar aMule
Post by: Aiidoneus on May 01, 2005, 10:15:23 PM
Aki esta.

Thx pela help que estás a dar!

cumpz
Title: Re: Como configurar aMule
Post by: geeko on May 02, 2005, 12:57:45 AM
:) no problem ;)

visto isso acho k so falta e' so' configurar o Port-Triggering
Ficando +- assim:
Code: [Select]
Application - Trigger Port Range - Incomming Port Range
aMule         - 4662~4662            - 4662~4662
aMule         - 4665~4665            - 4665~4665
aMule         - 4672~4672            - 4672~4672

para completar as regras no route (Isto tendo como base as portas por defeito do amule :) )

Fica bem
geeko
Title: Re: Como configurar aMule
Post by: Aiidoneus on May 02, 2005, 11:37:20 PM
Epah.. Fiz isso.. Mas continua sem dar... deve mm d havar algum problm....  ;(
Title: Re: Como configurar aMule
Post by: Seagull on May 03, 2005, 02:00:11 AM
1. Confirma que tens o ip ai indicado e que o amule está a usar essas portas.

2. Se o acima está bem, então é problema de firewall; tens alguma a funcionar?
Title: Re: Como configurar aMule
Post by: Aiidoneus on May 03, 2005, 09:23:18 PM
So uma duvida.. o ip tem d ser o ip do router ou o que a netcabo fornece? Se é o do router, ele continua sem funcionar.
E firewall n tenho.

Cumps
Title: Re: Como configurar aMule
Post by: Seagull on May 03, 2005, 09:56:01 PM
Não, o ip que pões no forwarding tem de ser o ip da maquina aonde está o amule.

Na imagem, indicas que o ip da maquina onde está o amule é 192.168.1.103

Para confirmares que esta bem, faz /sbin/ifconfig num terminal
Title: Re: Como configurar aMule
Post by: Aiidoneus on May 03, 2005, 10:03:15 PM
en1: flags=8863 mtu 1500
        inet6 fe80::211:24ff:fe95:15cf prefixlen 64 scopeid 0x5
        inet 192.168.1.101 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:11:24:95:15:cf
        media: autoselect status: active
        supported media: autoselect

Kual destes é?
Title: Re: Como configurar aMule
Post by: geeko on May 04, 2005, 12:45:10 AM
Aiidoneus,

onde foste buscar o ip 192.168.1.103? tens o dhcp activado no router!
:D Esta ai 1a boa razao para nao funcionar... o redirect esta para 1 outro ip k nao esse :D tens k mudar no router para o ip da tua maq (nesse caso 192.168.1.101).

Outra coisa que n podes esquecer e' sempre que fizeres 1 reboot a tua maq de verificares o ip k o dhcp te atribuiu e se for difirente mudar no router ou entao definires 1 ip static dentro dessa range qq coisa de 192.168.1.1 ate 192.168.1.254

fica bem,
geeko
Title: Re: Como configurar aMule
Post by: Aiidoneus on May 04, 2005, 09:09:52 PM
E não ha forma de ter apenas um ip estatico?
Title: Re: Como configurar aMule
Post by: Seagull on May 05, 2005, 01:00:45 AM
Sim, podes.

Escolhe um na range 192.168.1.x, com x entre 2 e 253 e segue este link (penso que tens o macx, correcto?):

http://www.its.caltech.edu/net/statmacx.html

Em IP põe o que escolheste

Em Router poe 192.168.1.1

Em DNS Servers teras de por os que se encontram (provavelmente) na tab Setup do Router, procura  por informações sobre a ligação.

Depois actualiza o forwarding do router com o ip que escolheste.
Title: Re: Como configurar aMule
Post by: Aiidoneus on May 06, 2005, 09:29:11 PM
Epah.. Isto continua sem dar.. Estive estes das fora.. E a bocado estive a voltar a tentar fazer tudo k k disseram outra x.. e nd... :\ Começo a pensar k isto n tem soluçao...
Title: Re: Como configurar aMule
Post by: geeko on May 07, 2005, 09:44:16 AM
Aiidoneus,

Se mantiveste o k foi aki descrito, confirma o teu ip interno, akele k vais inserir   no rouiter? so pode ser 1 problema desse genero

geeko