aMule Forum

English => aMule Help => Topic started by: forumusr on July 06, 2005, 10:28:12 AM

Title: lowID
Post by: forumusr on July 06, 2005, 10:28:12 AM

I installed amule from livna.org using yum install amule  but i keep getting lowid.

http://www.amule.org/testport.php says that test is successful and amule should work with no problems.

I used to get high ID in emule-windows. I know my router forwards the port.I also stop the firestarter firewall to check whether this is a firewall issue but no

When I launch amule is says port 4062 is not available...


what else should I check?

Title: RE: lowID
Post by: thedude0001 on July 06, 2005, 12:47:20 PM

Quote

Originally posted by forumusr
I used to get high ID in emule-windows. I know my router forwards the port.I also stop the firestarter firewall to check whether this is a firewall issue but no

Has your Linux PC the same IP address as windows had? Please double-check the port forwarding settings in your router. Another idea would be to change to another port since some ISPs block traffic on specific ports...

Title: RE: lowID
Post by: forumusr on July 06, 2005, 06:19:34 PM

I checked the port forwading settings of my DSL Modem's Router via its web-based console.I did not change any setting so everyhing is same as windows.
The same applies to ISP comment.When book windows I get high ID from emule.

Title: RE: lowID
Post by: forumusr on July 06, 2005, 10:27:30 PM

after rebooting the machine the problem is solved