aMule Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

We're back! (IN POG FORM)

Author Topic: 10390 - upnp not working  (Read 5787 times)

stoatwblr

  • Sr. Member
  • ****
  • Karma: 12
  • Offline Offline
  • Posts: 318
10390 - upnp not working
« on: November 28, 2010, 04:30:15 AM »
(Ubuntu Meerkat x64)

It looks like upnp has been broken somewhere between 10396 and 10390.

I was initially inclined to blame the router as upnp goes flakey after a  few weeks of uptime but its gui is showing other problems are able to setup port forwarding while amule isn't.

No idea where to even start looking as yet...

Logged

stoatwblr

  • Sr. Member
  • ****
  • Karma: 12
  • Offline Offline
  • Posts: 318
Re: 10390 - upnp not working
« Reply #1 on: November 28, 2010, 04:43:27 AM »
What's logged:

2010-11-28 03:39:30: Universal Plug and Play: Successfully retrieved SCPD Document for service urn:schemas-upnp-org:service:WANIPConnection:1, absEventSubURL: http://192.168.1.1:49152/upnp/event/WANIPConnection.
!2010-11-28 03:39:30: Universal Plug and Play: Successfully subscribed to service urn:schemas-upnp-org:service:WANIPConnection:1, absEventSubURL: http://192.168.1.1:49152/upnp/event/WANIPConnection.
!2010-11-28 03:39:30: Universal Plug and Play: Uninteresting service detected: 'urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1'. Ignoring.
!2010-11-28 03:39:30: Universal Plug and Play: Uninteresting service detected: 'urn:schemas-microsoft-com:service:OSInfo:1'. Ignoring.
!2010-11-28 03:39:30: Universal Plug and Play: UPNP_EVENT_RECEIVED:
!2010-11-28 03:39:30:     SID: uuid:1b8cdc8a-faa1-11df-be4f-e8f24a83398c
!2010-11-28 03:39:30:     Key: 0
!2010-11-28 03:39:30:     Property list:
!2010-11-28 03:39:30:         PossibleConnectionTypes='IP_Routed'
!2010-11-28 03:39:30:         ConnectionStatus='Connected'
!2010-11-28 03:39:30:         ExternalIPAddress='0.0.0.0'
!2010-11-28 03:39:30:         PortMappingNumberOfEntries='6'
 2010-11-28 03:39:39: Connection attempt to Share Islands (178.86.3.184:4184) timed out.
 2010-11-28 03:39:39: Connecting to !-= Porn Pit =-! (88.80.28.48 - 88.80.28.48:4321) using protocol obfuscation.
 2010-11-28 03:39:39: Connected to !-= Porn Pit =-! (88.80.28.48:4321)
 2010-11-28 03:39:50: WARNING: !-= Porn Pit =-! (88.80.28.48:4321) - NG : You have a lowid. Please review your network config and/or your settings.
!2010-11-28 03:39:50: Connection established on: !-= Porn Pit =-!
!2010-11-28 03:39:50: Connected to !-= Porn Pit =-! with LowID
 2010-11-28 03:39:50: New clientid is 7655554
!2010-11-28 03:39:50: WARNING: You have received Low-ID!
 2010-11-28 03:39:50:    Most likely this is because you're behind a firewall or router.
 2010-11-28 03:39:50:    For more information, please refer to http://wiki.amule.org
 2010-11-28 03:39:50: ServerMessage: server version 17.15 (lugdunum)


Logged

Stu Redman

  • Administrator
  • Hero Member
  • *****
  • Karma: 214
  • Offline Offline
  • Posts: 3739
  • Engines screaming
Re: 10390 - upnp not working
« Reply #2 on: November 28, 2010, 01:22:03 PM »
Quote from: stoatwblr on November 28, 2010, 04:30:15 AM
It looks like upnp has been broken somewhere between 10396 and 10390.
There's no 10396 yet. So which was the last working UPnP version? And - is it still working if you switch back to it? Even if you rebuild it with your current environment?
There was no change regarding UPnP for a long time. Of course something can have got broken though, but I rather suspect something with your router or build environment.
Logged
The image of mother goddess, lying dormant in the eyes of the dead, the sheaf of the corn is broken, end the harvest, throw the dead on the pyre -- Iron Maiden, Isle of Avalon

stoatwblr

  • Sr. Member
  • ****
  • Karma: 12
  • Offline Offline
  • Posts: 318
Re: 10390 - upnp not working
« Reply #3 on: November 28, 2010, 04:37:47 PM »
Oops..... I meant 10386

I've got a Netgear DG634PN with DGteam firmware 1018 on it. Upnp has always been a problem (requires several restarts after reboot and failed after a few weeks) but up to now, once going everything's chatted to it fine.

Right now Skype, Deluge and Pidgin are happily talking to it - but unlike Amule they never require restarting after upnp is restarted - they just pick up the adverts and reestablish the tunnels.

Logged

Vollstrecker

  • Administrator
  • Hero Member
  • *****
  • Karma: 67
  • Offline Offline
  • Posts: 1549
  • Unofficial Debian Packager
    • http://vollstreckernet.de
Re: 10390 - upnp not working
« Reply #4 on: November 28, 2010, 04:55:52 PM »
Maybe your upnp libs have been updated.
Logged
Homefucking is killing prostitution

stoatwblr

  • Sr. Member
  • ****
  • Karma: 12
  • Offline Offline
  • Posts: 318
Re: 10390 - upnp not working
« Reply #5 on: November 28, 2010, 07:27:17 PM »
The upnp libs are stable. 10386 works.

After running for a few hours, here'e what's logged:

!2010-11-28 16:56:50: Universal Plug and Play: UPNP_EVENT_AUTORENEWAL_FAILED: Re-subscribed to EventURL 'http://192.168.1.1:49152/upnp/event/WANIPConnection' with SID == 'uuid:7e4da0a6-fb10-11df-be4f-e8f24a83398c'.
!2010-11-28 16:56:50: Universal Plug and Play: UPNP_EVENT_RECEIVED:
!2010-11-28 16:56:50:     SID: uuid:7e4da0a6-fb10-11df-be4f-e8f24a83398c
!2010-11-28 16:56:50:     Key: 0
!2010-11-28 16:56:50:     Property list:
!2010-11-28 16:56:50:         PossibleConnectionTypes='IP_Routed'
!2010-11-28 16:56:50:         ConnectionStatus='Connected'
!2010-11-28 16:56:50:         ExternalIPAddress='0.0.0.0'
!2010-11-28 16:56:50:         PortMappingNumberOfEntries='6'
!2010-11-28 17:27:30: Universal Plug and Play: UPNP_EVENT_AUTORENEWAL_FAILED: Re-subscribed to EventURL 'http://192.168.1.1:49152/upnp/event/WANIPConnection' with SID == 'uuid:c710b6da-fb14-11df-be4f-e8f24a83398c'.
!2010-11-28 17:27:30: Universal Plug and Play: UPNP_EVENT_RECEIVED:
!2010-11-28 17:27:30:     SID: uuid:c710b6da-fb14-11df-be4f-e8f24a83398c
!2010-11-28 17:27:30:     Key: 0
!2010-11-28 17:27:30:     Property list:
!2010-11-28 17:27:30:         PossibleConnectionTypes='IP_Routed'
!2010-11-28 17:27:30:         ConnectionStatus='Connected'
!2010-11-28 17:27:30:         ExternalIPAddress='0.0.0.0'
!2010-11-28 17:27:30:         PortMappingNumberOfEntries='6'
!2010-11-28 17:58:10: Universal Plug and Play: UPNP_EVENT_AUTORENEWAL_FAILED: Re-subscribed to EventURL 'http://192.168.1.1:49152/upnp/event/WANIPConnection' with SID == 'uuid:0fd3375e-fb19-11df-be4f-e8f24a83398c'.
!2010-11-28 17:58:14: Universal Plug and Play: UPNP_EVENT_RECEIVED:
!2010-11-28 17:58:14:     SID: uuid:0fd3375e-fb19-11df-be4f-e8f24a83398c
!2010-11-28 17:58:14:     Key: 0
!2010-11-28 17:58:14:     Property list:
!2010-11-28 17:58:14:         PossibleConnectionTypes='IP_Routed'
!2010-11-28 17:58:14:         ConnectionStatus='Connected'
!2010-11-28 17:58:14:         ExternalIPAddress='0.0.0.0'
!2010-11-28 17:58:14:         PortMappingNumberOfEntries='6'

Logged

stoatwblr

  • Sr. Member
  • ****
  • Karma: 12
  • Offline Offline
  • Posts: 318
Re: 10390 - upnp not working
« Reply #6 on: November 28, 2010, 08:33:17 PM »

Speaking of upnp updates though, it would be "very useful" if libupnp4 was supported....

Logged