Topic: lowid with ipfilter.dat (Read 2299 times)

ghubsch · « **on:** January 13, 2005, 09:47:03 PM »

When I have a list of IP's defined in ipfilter.dat, I always get a lowid.
The IP address from the server is allowed at ipfilter.dat

For instance, below is a part of my ipfilter.dat:

.....
195.22.0.0 - 195.22.31.255 , 200 , Via Networks
195.22.32.0 - 195.245.244.241 , 100 , === THE WORLD ===
195.245.244.242 - 195.245.244.244 , 200 , Razorback2
195.245.244.245 - 212.0.159.255 , 100 , === THE WORLD ===
212.0.160.0 - 212.0.191.255 , 200 , Sonae
....

And I can't connect to Razorback (192.245.244.243) with a highid.
If I delete ipfilter.dat, I receive a highid.

Does anyone have a clue ?

Regards,

GHubsch

deltaHF · « **Reply #1 on:** January 14, 2005, 01:40:42 AM »

does it happens with 2.0 rc8 or cvs too?

and maybe try another ipfilter.dat file, i.e: http://download.berlios.de/amule/ipfilter.dat

cheers

Xaignar · « **Reply #2 on:** January 14, 2005, 01:43:00 AM »

What is your filter (Access) level?

livebrain · « **Reply #3 on:** January 14, 2005, 06:24:38 AM »

this was discussed at portuguese forum

http://forum.amule.org/thread.php?threadid=3744&sid=

razorback uses more than one ip, u will need to allow this range to get highid on razorback
195.245.244.240 - 195.245.244.243

aMule Forum

News:

Author Topic: lowid with ipfilter.dat (Read 2299 times)

ghubsch

lowid with ipfilter.dat

deltaHF

Re: lowid with ipfilter.dat

Xaignar

Re: lowid with ipfilter.dat

livebrain

Re: lowid with ipfilter.dat