aMule Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

We're back! (IN POG FORM)

Pages: [1] 2

Author Topic: webcam  (Read 22134 times)

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
webcam
« on: March 21, 2008, 02:06:41 AM »

ciao,volevo installare la webcam su ubuntu 7.10 da usare con aMSN oppure un'altro programma!
Allora dispongo di 2 webcam 1-Hercules webcam Classic 2-Trust WB-5400.
Ho fatto diversi commandi dal terminale pero anche se sono collegate non li vedo da nessuna parte e con camorama mi dice che Could not connect to video device (/dev/video0) Please check connection. E' qua il punto sono collegate ma non si installano,ho i dirver pero sono solo per il winzoz  :-\!!!
Cosa potrei fare perchè sono le ultime periferiche da installare tutte le altre funzionano una bomba anche senza installare alcunche driver  :-\

Aiuto  :'(

Grazie in anticipo
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

wuischke

  • Developer
  • Hero Member
  • *****
  • Karma: 183
  • Offline Offline
  • Posts: 4292
Re: webcam
« Reply #1 on: March 21, 2008, 08:35:55 AM »

Deviamo sapere che "driver" ha bisongo la webcam. Quando lei conecti, cosa dice "dmesg"? E "lsusb -v"?
Logged

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #2 on: March 21, 2008, 10:46:57 AM »

allora facendo
fation@fation-desktop:~$ lsusb
Bus 005 Device 004: ID 0c45:624e Microdia
Bus 005 Device 002: ID 07d1:3c03 D-Link System
Bus 005 Device 001: ID 0000:0000 
Bus 003 Device 002: ID 0a5c:200a Broadcom Corp.
Bus 003 Device 001: ID 0000:0000 
Bus 004 Device 001: ID 0000:0000 
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 
fation@fation-desktop:~$
 mi da questo  ed collegando la webcam è questo Bus 005 Device 004: ID 0c45:624e Microdia che esce solo collegando la Trust WB-5400 invece per la Hercules Webcam Classic non mi da niente

fation@fation-desktop:~$ lsusb
Bus 005 Device 002: ID 07d1:3c03 D-Link System
Bus 005 Device 001: ID 0000:0000 
Bus 003 Device 002: ID 0a5c:200a Broadcom Corp.
Bus 003 Device 001: ID 0000:0000 
Bus 004 Device 001: ID 0000:0000 
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 
fation@fation-desktop:~$

comunque fa niente per la seconda,l'importante è che installo la Trust WB-5400 perchè ci tengo di più  ;)

che sarebbe questo Bus 005 Device 004: ID 0c45:624e Microdia

Grazie mille
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #3 on: March 21, 2008, 10:56:16 AM »

invece la "dmesg" mi da  (scusate la lunghezza  ::) )

Code: [Select]
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 3200.537 MHz processor.
[   31.881219] Console: colour VGA+ 80x25
[   31.881529] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   31.881856] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   31.902779] Memory: 1027456k/1048320k available (2015k kernel code, 20244k reserved, 916k data, 364k init, 130816k highmem)
[   31.902788] virtual kernel memory layout:
[   31.902789]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   31.902790]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   31.902791]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   31.902792]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   31.902793]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   31.902794]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[   31.902795]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[   31.902798] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   31.902832] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   31.982618] Calibrating delay using timer specific routine.. 6409.15 BogoMIPS (lpj=12818306)
[   31.982639] Security Framework v1.0.0 initialized
[   31.982643] SELinux:  Disabled at boot.
[   31.982655] Mount-cache hash table entries: 512
[   31.982761] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[   31.982769] monitor/mwait feature present.
[   31.982771] using mwait in idle threads.
[   31.982777] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   31.982780] CPU: L2 cache: 2048K
[   31.982782] CPU: Physical Processor ID: 0
[   31.982784] CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000649d 00000000 00000000
[   31.982793] Compat vDSO mapped to ffffe000.
[   31.982807] Checking 'hlt' instruction... OK.
[   31.998652] SMP alternatives: switching to UP code
[   31.999020] Early unpacking initramfs... done
[   32.273451] ACPI: Core revision 20070126
[   32.273501] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   32.275941] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
[   32.275958] SMP alternatives: switching to SMP code
[   32.276050] Booting processor 1/1 eip 3000
[   32.286299] Initializing CPU#1
[   32.365451] Calibrating delay using timer specific routine.. 6400.72 BogoMIPS (lpj=12801448)
[   32.365460] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
[   32.365467] monitor/mwait feature present.
[   32.365473] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   32.365476] CPU: L2 cache: 2048K
[   32.365479] CPU: Physical Processor ID: 0
[   32.365481] CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000649d 00000000 00000000
[   32.365993] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
[   32.366035] Total of 2 processors activated (12809.87 BogoMIPS).
[   32.366944] ENABLING IO-APIC IRQs
[   32.367271] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   32.513110] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
« Last Edit: March 21, 2008, 08:59:36 PM by Dj_Barthezz »
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #4 on: March 21, 2008, 10:57:24 AM »

Code: [Select]
32.533065] Brought up 2 CPUs
[   32.570187] migration_cost=17
[   32.570349] Booting paravirtualized kernel on bare hardware
[   32.570447] Time:  9:21:16  Date: 02/21/108
[   32.570470] NET: Registered protocol family 16
[   32.570554] EISA bus registered
[   32.570559] ACPI: bus type pci registered
[   32.570688] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[   32.570690] PCI: Using configuration type 1
[   32.570692] Setting up standard PCI resources
[   32.580650] ACPI: EC: Look up EC in DSDT
[   32.585298] ACPI: Interpreter enabled
[   32.585302] ACPI: (supports S0 S1 S3 S4 S5)
[   32.585322] ACPI: Using IOAPIC for interrupt routing
[   32.594750] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   32.594761] PCI: Probing PCI hardware (bus 00)
[   32.596310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   32.596521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[   32.608594] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   32.608711] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[   32.608843] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   32.608957] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   32.609071] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   32.609183] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   32.609296] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   32.609410] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   32.609518] Linux Plug and Play Support v0.97 (c) Adam Belay
[   32.609528] pnp: PnP ACPI init
[   32.609537] ACPI: bus type pnp registered
[   32.613885] pnp: PnP ACPI: found 15 devices
[   32.613888] ACPI: ACPI bus type pnp unregistered
[   32.613892] PnPBIOS: Disabled by ACPI PNP
[   32.613944] PCI: Using ACPI for IRQ routing
[   32.613947] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   32.624934] NET: Registered protocol family 8
[   32.624936] NET: Registered protocol family 20
[   32.624995] pnp: 00:07: ioport range 0x290-0x297 has been reserved
[   32.625004] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[   32.625007] pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[   32.625014] pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[   32.625020] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
[   32.625022] pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[   32.625025] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[   32.625028] pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[   32.628685] Time: tsc clocksource has been installed.
[   32.655290] PCI: Bridge: 0000:00:01.0
[   32.655292]   IO window: disabled.
[   32.655297]   MEM window: disabled.
[   32.655301]   PREFETCH window: disabled.
[   32.655307] PCI: Bridge: 0000:00:02.0
[   32.655310]   IO window: c000-cfff
[   32.655316]   MEM window: fe200000-feafffff
[   32.655321]   PREFETCH window: cff00000-dfefffff
[   32.655342] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   32.655360] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
[   32.655366] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   32.655376] NET: Registered protocol family 2
[   32.692601] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   32.692665] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   32.693451] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   32.693687] TCP: Hash tables configured (established 131072 bind 65536)
[   32.693690] TCP reno registered
[   32.704708] checking if image is initramfs... it is
[   33.155082] Switched to high resolution mode on CPU 0
[   33.155163] Switched to high resolution mode on CPU 1
[   33.243858] Freeing initrd memory: 7334k freed
[   33.244419] audit: initializing netlink socket (disabled)
[   33.244433] audit(1206091276.108:1): initialized
[   33.244531] highmem bounce pool size: 64 pages
[   33.246692] VFS: Disk quotas dquot_6.5.1
[   33.246747] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   33.246849] io scheduler noop registered
[   33.246852] io scheduler anticipatory registered
[   33.246854] io scheduler deadline registered
[   33.246869] io scheduler cfq registered (default)
[   33.246888] PCI: VIA PCI bridge detected. Disabling DAC.
[   33.246965] PCI: Bypassing VIA 8237 APIC De-Assert Message
[   33.246973] Boot video device is 0000:02:00.0
[   33.247071] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   33.247118] assign_interrupt_mode Found MSI capability
[   33.247121] Allocate Port Service[0000:00:02.0:pcie00]
[   33.247160] Allocate Port Service[0000:00:02.0:pcie02]
[   33.247326] isapnp: Scanning for PnP cards...
[   33.597891] isapnp: No Plug & Play device found
[   33.623126] Real Time Clock Driver v1.12ac
[   33.623232] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   33.623394] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   33.623962] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   33.624705] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   33.624895] input: Macintosh mouse button emulation as /class/input/input0
[   33.624984] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   33.625356] serio: i8042 KBD port at 0x60,0x64 irq 1
[   33.625364] serio: i8042 AUX port at 0x60,0x64 irq 12
[   33.625966] mice: PS/2 mouse device common for all mice
[   33.626092] EISA: Probing bus 0 at eisa.0
[   33.626133] EISA: Detected 0 cards.
[   33.626211] TCP cubic registered
[   33.626222] NET: Registered protocol family 1
[   33.626242] Using IPI No-Shortcut mode
[   33.626389]   Magic number: 0:335:374
[   33.626706] Freeing unused kernel memory: 364k freed
[   33.644477] input: AT Translated Set 2 keyboard as /class/input/input1
[   34.848192] AppArmor: AppArmor initialized<5>audit(1206091277.608:2):  type=1505 info="AppArmor initialized" pid=1232
[   34.854327] fuse init (API version 7.8)
[   34.858911] Failure registering capabilities with primary security module.
[   34.894135] ACPI: Processor [CPU1] (supports 16 throttling states)
[   35.484278] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   35.484283] Copyright (c) 1999-2006 Intel Corporation.
[   35.484346] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 20 (level, low) -> IRQ 17
[   35.757642] e1000: 0000:00:0d.0: e1000_probe: (PCI:33MHz:32-bit) 00:13:d4:6a:5e:34
[   35.759129] SCSI subsystem initialized
[   35.763531] usbcore: registered new interface driver usbfs
[   35.763563] usbcore: registered new interface driver hub
[   35.763627] usbcore: registered new device driver usb
[   35.764856] USB Universal Host Controller Interface driver v3.0
[   35.771297] Floppy drive(s): fd0 is 1.44M
[   35.782159] libata version 2.21 loaded.
[   35.791197] FDC 0 is a post-1991 82077
[   35.800624] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   35.800675] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 18
[   35.800691] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   35.800843] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
« Last Edit: March 21, 2008, 09:00:10 PM by Dj_Barthezz »
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #5 on: March 21, 2008, 10:58:29 AM »

Code: [Select]
[   35.800878] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000d480
[   35.801032] usb usb1: configuration #1 chosen from 1 choice
[   35.801072] hub 1-0:1.0: USB hub found
[   35.801082] hub 1-0:1.0: 2 ports detected
[   35.902900] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 18
[   35.902915] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   35.902947] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   35.902972] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000d400
[   35.903104] usb usb2: configuration #1 chosen from 1 choice
[   35.903142] hub 2-0:1.0: USB hub found
[   35.903154] hub 2-0:1.0: 2 ports detected
[   36.006584] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 18
[   36.006596] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   36.006628] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   36.006653] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000d080
[   36.006779] usb usb3: configuration #1 chosen from 1 choice
[   36.006816] hub 3-0:1.0: USB hub found
[   36.006825] hub 3-0:1.0: 2 ports detected
[   36.110245] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 18
[   36.110258] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   36.110288] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   36.110313] uhci_hcd 0000:00:10.3: irq 18, io base 0x0000d000
[   36.110439] usb usb4: configuration #1 chosen from 1 choice
[   36.110478] hub 4-0:1.0: USB hub found
[   36.110486] hub 4-0:1.0: 2 ports detected
[   36.142058] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   36.214051] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 18
[   36.214064] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   36.214099] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[   36.214141] ehci_hcd 0000:00:10.4: irq 18, io mem 0xfebfb800
[   36.273667] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   36.273807] usb usb5: configuration #1 chosen from 1 choice
[   36.273850] hub 5-0:1.0: USB hub found
[   36.273859] hub 5-0:1.0: 8 ports detected
[   36.377547] sata_via 0000:00:0f.0: version 2.2
[   36.377574] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17
[   36.377616] sata_via 0000:00:0f.0: routed to hard irq line 10
[   36.377699] scsi0 : sata_via
[   36.377757] scsi1 : sata_via
[   36.378040] ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 17
[   36.378045] ata2: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 17
[   36.381924] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   36.381930] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   36.580727] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   36.680420] usb 1-1: device not accepting address 2, error -71
[   36.792085] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[   36.802384] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[   36.802411] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17
[   36.802427] VP_IDE: chipset revision 6
[   36.802430] VP_IDE: not 100% native mode: will probe irqs later
[   36.802450] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[   36.802461]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[   36.802478]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[   36.802489] Probing IDE interface ide0...
[   37.214920] hda: SAMSUNG SP2514N, ATA DISK drive
[   37.494070] hdb: Maxtor 6Y080L0, ATA DISK drive
[   37.550281] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   37.558979] Probing IDE interface ide1...
[   37.868839] usb 5-1: new high speed USB device using ehci_hcd and address 2
[   38.139236] usb 5-1: configuration #1 chosen from 1 choice
[   38.419272] hdc: TSSTcorpCD/DVDW SH-S162A, ATAPI CD/DVD-ROM drive
[   38.614576] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   39.005590] usb 3-1: configuration #1 chosen from 1 choice
[   39.089492] ide1 at 0x170-0x177,0x376 on irq 15
[   39.102818] hda: max request size: 512KiB
[   39.104111] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
[   39.104345] hda: cache flushes supported
[   39.104389]  hda: hda2 < hda5 hda6 hda7 >
[   39.124974] hdb: max request size: 128KiB
[   39.125107] hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[   39.125242] hdb: cache flushes supported
[   39.125270]  hdb: hdb1
[   39.133467] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[   39.133480] Uniform CD-ROM driver Revision: 3.20
[   39.589654] Attempting manual resume
[   39.589658] swsusp: Resume From Partition 3:7
[   39.589660] PM: Checking swsusp image.
[   39.589821] PM: Resume from disk failed.
[   39.611393] kjournald starting.  Commit interval 5 seconds
[   39.611404] EXT3-fs: mounted filesystem with ordered data mode.
[   44.955032] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   45.008054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   45.046400] Linux agpgart interface v0.102 (c) Dave Jones
[   45.108385] agpgart: Detected VIA PT880 Ultra chipset
[   45.116323] agpgart: AGP aperture is 128M @ 0xf0000000
[   45.616199] input: PC Speaker as /class/input/input2
[   46.046086] Bluetooth: Core ver 2.11
[   46.046149] NET: Registered protocol family 31
[   46.046152] Bluetooth: HCI device and connection manager initialized
[   46.046156] Bluetooth: HCI socket layer initialized
[   46.065877] Bluetooth: HCI USB driver ver 2.9
[   46.068371] usbcore: registered new interface driver hci_usb
[   46.288033] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 19
[   46.362133] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[   46.365175] parport_pc 00:06: reported by Plug and Play ACPI
[   46.365324] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   46.494189] ieee80211_init: failed to initialize WME (err=-17)
[   46.519518] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[   46.519609] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[   46.519700] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[   46.519833] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
[   46.520319] wmaster0: Selected rate control algorithm 'simple'
[   46.588918] usbcore: registered new interface driver rt73usb
[   47.432400] lp0: using parport0 (interrupt-driven).
[   47.468593] Adding 979924k swap on /dev/hda7.  Priority:-1 extents:1 across:979924k
[   47.806807] EXT3 FS on hda6, internal journal
[   49.159295] No dock devices found.
[   49.324498] input: Power Button (FF) as /class/input/input4
[   49.324525] ACPI: Power Button (FF) [PWRF]
[   49.324660] input: Sleep Button (CM) as /class/input/input5
[   49.324690] ACPI: Sleep Button (CM) [SLPB]
[   49.324748] input: Power Button (CM) as /class/input/input6
[   49.324770] ACPI: Power Button (CM) [PWRB]
[   50.363321] ppdev: user-space parallel port driver
[   50.533825] audit(1206087693.742:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5034 profile="/usr/sbin/cupsd"
[   50.579732] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   50.579739] apm: disabled - APM is not SMP safe.
[   51.208239] Failure registering capabilities with primary security module.
[   51.333509] Bluetooth: L2CAP ver 2.8
[   51.333515] Bluetooth: L2CAP socket layer initialized
[   51.433529] Bluetooth: RFCOMM socket layer initialized
[   51.433885] Bluetooth: RFCOMM TTY layer initialized
[   51.433891] Bluetooth: RFCOMM ver 1.8
[   53.173571] [drm] Initialized drm 1.1.0 20060810
[   53.194132] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 20
[   53.194699] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[   55.743675] [drm] Setting GART location based on new memory map
[   55.744437] [drm] Loading R300 Microcode
[   55.744487] [drm] writeback test succeeded in 1 usecs
[  179.198726] NET: Registered protocol family 17
[  180.167194] wlan0: Initial auth_alg=0
[  180.167205] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  180.366000] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  180.565381] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  180.641636] NET: Registered protocol family 10
[  180.642073] lo: Disabled Privacy Extensions
[  180.642577] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  180.643627] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  180.764786] wlan0: authentication with AP 00:1b:11:d2:67:84 timed out
[  190.929012] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  190.929746] wlan0: Initial auth_alg=0
[  190.929752] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  190.933236] wlan0: Initial auth_alg=0
[  190.933241] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  190.933731] wlan0: Initial auth_alg=0
[  190.933736] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  191.129439] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  191.328832] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  191.528229] wlan0: authentication with AP 00:1b:11:d2:67:84 timed out
[  201.692443] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  201.693174] wlan0: Initial auth_alg=0
[  201.693180] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  201.696664] wlan0: Initial auth_alg=0
[  201.696669] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  201.697161] wlan0: Initial auth_alg=0
[  201.697166] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  201.892891] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  202.092294] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  202.291684] wlan0: authentication with AP 00:1b:11:d2:67:84 timed out
[  212.455874] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  212.456606] wlan0: Initial auth_alg=0
[  212.456612] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  212.460219] wlan0: Initial auth_alg=0
[  212.460224] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  212.460716] wlan0: Initial auth_alg=0
[  212.460721] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  212.656353] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  212.855744] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  213.055145] wlan0: authentication with AP 00:1b:11:d2:67:84 timed out
[  223.219427] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  223.220161] wlan0: Initial auth_alg=0
[  223.220167] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  223.223773] wlan0: Initial auth_alg=0
[  223.223779] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  223.224271] wlan0: Initial auth_alg=0
[  223.224276] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  223.419804] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  223.619200] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  223.818597] wlan0: authentication with AP 00:1b:11:d2:67:84 timed out
[  233.982856] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  233.983590] wlan0: Initial auth_alg=0
[  233.983596] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  233.987079] wlan0: Initial auth_alg=0
[  233.987084] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  233.987576] wlan0: Initial auth_alg=0
[  233.987581] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  234.183260] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  234.382655] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  234.582053] wlan0: authentication with AP 00:1b:11:d2:67:84 timed out
[  244.746288] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  244.747267] wlan0: Initial auth_alg=0
[  244.747273] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  244.750509] wlan0: Initial auth_alg=0
[  244.750514] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  244.751006] wlan0: Initial auth_alg=0
[  244.751011] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  244.946716] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  245.146114] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  245.345510] wlan0: authentication with AP 00:1b:11:d2:67:84 timed out
[  255.509719] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  261.284280] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  267.058841] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  272.833406] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  278.607969] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  284.382406] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  284.383139] wlan0: Initial auth_alg=0
[  284.383145] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  284.386638] wlan0: Initial auth_alg=0
[  284.386644] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  284.386659] wlan0: RX deauthentication from 00:1b:11:d2:67:84 (reason=6)
[  284.387127] wlan0: Initial auth_alg=0
[  284.387134] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  284.387150] wlan0: RX authentication from 00:1b:11:d2:67:84 (alg=0 transaction=2 status=0)
[  284.387154] wlan0: authenticated
[  284.387158] wlan0: associate with AP 00:1b:11:d2:67:84
[  284.390123] wlan0: authentication frame received from 00:1b:11:d2:67:84, but not in authenticate state - ignored
[  284.391868] wlan0: authentication frame received from 00:1b:11:d2:67:84, but not in authenticate state - ignored
[  284.393987] wlan0: RX AssocResp from 00:1b:11:d2:67:84 (capab=0x471 status=0 aid=1)
[  284.393991] wlan0: associated
[  284.396364] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  435.057327] wlan0: disassociate(reason=3)
[  435.933253] wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
[  436.307214] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  438.038334] wlan0: Initial auth_alg=0
[  438.038341] wlan0: authenticate with AP 00:1b:11:d2:67:84
[  438.039840] wlan0: RX authentication from 00:1b:11:d2:67:84 (alg=0 transaction=2 status=0)
[  438.039844] wlan0: authenticated
[  438.039849] wlan0: associate with AP 00:1b:11:d2:67:84
[  438.041956] wlan0: RX ReassocResp from 00:1b:11:d2:67:84 (capab=0x471 status=0 aid=1)
[  438.041960] wlan0: associated
[  438.044330] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  438.316920] printk: 1 messages suppressed.
[  438.316926] wlan0: duplicate address detected!
[  446.932772] wlan0: duplicate address detected!
[ 1275.586886] wlan0: CTS protection enabled (BSSID=00:1b:11:d2:67:84)
[ 1276.199342] wlan0: CTS protection disabled (BSSID=00:1b:11:d2:67:84)
[ 1276.403537] wlan0: CTS protection enabled (BSSID=00:1b:11:d2:67:84)
[ 1277.017067] wlan0: CTS protection disabled (BSSID=00:1b:11:d2:67:84)
[ 1348.111212] usb 5-6: new high speed USB device using ehci_hcd and address 4
[ 1348.245369] usb 5-6: configuration #1 chosen from 1 choice
[ 1462.702582] usb 5-6: USB disconnect, address 4
[ 1467.462348] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 1467.581993] usb 3-2: device descriptor read/64, error 8
[ 1467.805321] usb 3-2: device descriptor read/64, error 8
[ 1468.020656] usb 3-2: new full speed USB device using uhci_hcd and address 4
[ 1468.140291] usb 3-2: device descriptor read/64, error 8
[ 1468.363647] usb 3-2: device descriptor read/64, error 8
[ 1468.578974] usb 3-2: new full speed USB device using uhci_hcd and address 5
[ 1468.610225] usb 3-2: device descriptor read/8, error -71
[ 1468.736831] usb 3-2: device descriptor read/8, error -71
[ 1468.949845] usb 3-2: new full speed USB device using uhci_hcd and address 6
[ 1468.977079] usb 3-2: device descriptor read/8, error -71
[ 1469.104683] usb 3-2: device descriptor read/8, error -71
[ 1848.155292] usb 5-6: new high speed USB device using ehci_hcd and address 6
[ 1848.289457] usb 5-6: configuration #1 chosen from 1 choice
fation@fation-desktop:~$

« Last Edit: March 21, 2008, 09:01:12 PM by Dj_Barthezz »
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #6 on: March 21, 2008, 11:00:11 AM »

scusate ancora una volta per la lunghezza dei post però più si dice su un problema meglio è

Grazie

Sono in attesa
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

gash

  • Jr. Member
  • **
  • Karma: -2
  • Offline Offline
  • Posts: 52
  • ArchLinux
Re: webcam
« Reply #7 on: March 21, 2008, 12:21:29 PM »

http://eccelinux.org/component/option,com_smf/Itemid,26/topic,207.0/
http://eccelinux.org/component/option,com_smf/Itemid,26/topic,395.0/
Qua trovi due discussioni su due webcam con chipset microdia, vedi se ti possono essere utili.
Per ridurre le dimensioni dei messaggi e log di sistema inserisci il testo tra i tag
Code: [Select]
utilizzando l'icona a forma di # che trovi sopra le faccine quandi scrivi un post.

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #8 on: March 21, 2008, 01:52:14 PM »

ho visto tutto ma non sono ancora riuscito ad installarla ,ho fatto una marea di comm dal terminale ho installato vari packages ma il risultato è sempre lo stesso non riesco ad installarla  :'(
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

gash

  • Jr. Member
  • **
  • Karma: -2
  • Offline Offline
  • Posts: 52
  • ArchLinux
Re: webcam
« Reply #9 on: March 21, 2008, 07:27:24 PM »

Hai provato con questi driver? seguendo la procedura descritta qui, ho provato a fare un giro nel sito e negli ultimi due tre giorni hanno fixato qualche bug proprio per le webcam con quel ID, una volta installato il driver, per vedere se funziona devi avviare qualche programma che usa la webcam e vedere se la riconosce, tipo camorama, ekiga skype etc etc.

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #10 on: March 21, 2008, 08:58:44 PM »

installando git e git-gui e anche git-core dopo andando sul terminale ed inserendi il com
mi viene fuori questo :
Code: [Select]
fation@fation-desktop:~$ git clone http://repo.or.cz/r/microdia.git
Initialized empty Git repository in /home/fation/microdia/.git/
/usr/bin/git-clone: 310: curl: not found
Cannot get remote repository information.
Perhaps git-update-server-info needs to be run there?

dopo è inutile facendo gli altri commands perchè siccome mi da errore sulla prima  :'(
non può rovinarmi la voglia per ubuntu sta maledetta cam, è che mi serve non so che fare :( :(
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

gash

  • Jr. Member
  • **
  • Karma: -2
  • Offline Offline
  • Posts: 52
  • ArchLinux
Re: webcam
« Reply #11 on: March 23, 2008, 10:10:36 PM »

Code: [Select]
sudo apt-get install curle poi riprova con il comando che da errore.

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #12 on: March 24, 2008, 12:56:02 AM »

Porca miseria installo na roba mi da un'altro errore pffffffffffffffffffffff che nervoso

installo il curl dopo faccio il comando per installare microdia , la installo , poi l'altro comando:

Code: [Select]
fation@fation-desktop:~$ cd microdia
fation@fation-desktop:~/microdia$ make
make -C /lib/modules/2.6.22-14-generic/build SUBDIRS=/home/fation/microdia modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[1]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
make: ctags: Command not found
make: *** [driver] Error 127
fation@fation-desktop:~/microdia$

e mi da quest'altro errore
non so più che fare  :-\

« Last Edit: March 24, 2008, 12:59:29 AM by Dj_Barthezz »
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #13 on: March 24, 2008, 01:42:37 AM »

Ho letto che l'errore   make: *** [driver] Error 127
non ha importanza :
Code: [Select]
If you get the following error

make: *** [driver] Error 127
error 127 simply means that the module is not in the proper location, not a major error.

poi ci sono faccio l'altro comando il penultimo dell'installazione :

Code: [Select]
fation@fation-desktop:~/microdia$ insmod ./microdia.ko
insmod: error inserting './microdia.ko': -1 Operation not permitted
fation@fation-desktop:~/microdia$

niente ancora niente

nel sito della microdia mi dice di diventare root :

Code: [Select]
fation@fation-desktop:~$ sudo -i
root@fation-desktop:~# insmod ./microdia.ko
insmod: can't read './microdia.ko': No such file or directory
root@fation-desktop:~#

il file microdia.ko è dentro la dir di microdia  e se klikko 2 volte tanto per vedere cosa viene fuori mi dice che non può essere aperto!

allora riepilogando tutto : facendo tutto mi manca l'ultimo gradino e poi da cosa si dice sul sito si deve fare un dmesg e vedere un paio di righe sul terminale ed il gioco è fatto....mi manca solo quel errore li e basta. che faccio ?

Gash grazie mille per l'aiuto che mi stai dando  grazie ancora

« Last Edit: March 24, 2008, 04:30:35 AM by Dj_Barthezz »
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union

Dj_Barthezz

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 66
  • Albanian Linux Dj
    • albalinux
Re: webcam
« Reply #14 on: March 24, 2008, 03:10:33 PM »

Ragazzi il gioco è fatto  :P

alla fine dopo svariati tentativi ho installato la mia webcam looooooooooool

ho seguito una procedura così :

Code: [Select]
sudo apt-get install linux-source build-essential linux-headers-$(uname -r)
Code: [Select]
cd ~/Desktop
tar xfvz gspcav1-20070110.tar.gz
cd gspcav1-20071224

Code: [Select]
sudo ./gspca_build
e siccome avevo fatto altri comandi per scaricare i moduli di microdia ho collegato la webcam, ho aperto camorama non è che si vede granchè ma l'importante è che Ubuntu l'ha installata e sono troppo contento!!!  ;D

Ancora una volta grazie per l'aiuto

P.S scusate il mio italiano se non è troppo comprensibile è che sono straniero ma ci provo con tutte le forze a scriverlo

ciao ciao
Logged
The London Conference in 1912 Divided The Great Albania in Kosovo+Macedonia+South Montenegro+Northern Greece = Great Albania...Still waiting for the mighty Union
Pages: [1] 2