Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[sublist]

Hi,

i installed every needed package and the newest rc5 amule but when i start amule i get following message and then nothing happens:

amule: Symbol `_ZTV10wxTextCtrl' has different size in shared object, consider re-linking
Initialising aMule
Userhash loaded: 5D5D7BDE1C0EDA62CEE8F1CEC0646F1A
*** UDP socket at 4665
*** TCP socket at 4662
*** UDP socket at 4672

Thank 4 help
Peter

[deltaHF]

u have 100% the wrong wxgtk rpm installed ..

check for your linux distri wx rpms, uninstall them and install the one u can find in our installation howto (+ our amule rpm).

and also search here on forum for ->  _ZTV10wxTextCtrl  .. a lot of threads

greets

[sublist]

Greetz

[hamish]

Hi,

I am having a similar problem, although without any mention of "ZTV10wxTextCtrl".  I am upgrading from 1.2.6. I have been though the "HowTo" page and made sure I had all of the files needed for an RPM installation (the only ones that actually needed upgrading were the libcrypt files).  I then downloaded aMule version 2.0.0.rc5 for RH9.

It was freezing at the same stage as the original poster in this thread, so I ran it through gdb to see where it was falling over....

(gdb) r
Starting program: /usr/bin/amule
[New Thread 1085014304 (LWP 4740)]
Initialising aMule
Userhash loaded: 398907C59E0ED85D809A2F249AA96F6A
[New Thread 1096342720 (LWP 4741)]
index.htm is 0-size, not added
*** UDP socket at 4665
*** TCP socket at 4662
*** UDP socket at 4672

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 1085014304 (LWP 4740)]
0x42074245 in _int_malloc () from /lib/tls/libc.so.6
(gdb) where
#0  0x42074245 in _int_malloc () from /lib/tls/libc.so.6
#1  0x4207335b in malloc () from /lib/tls/libc.so.6
#2  0x409dae9e in operator new(unsigned) () from /usr/lib/libstdc++.so.5
#3  0x0825302c in CClientCreditsList::LoadList() ()
#4  0x082527f6 in CClientCreditsList::CClientCreditsList(CPreferences*) ()
#5  0x083987be in CamuleApp::OnInit() ()
#6  0x40234091 in wxEntry(int, char**) () from /usr/lib/libwx_gtk-2.4.so.0
#7  0x08395fd2 in main ()
#8  0x42015574 in __libc_start_main () from /lib/tls/libc.so.6
(gdb)


Thanks for any help you can give me.

Best wishes,

Hamish

[phoenix]

hamish,

paste the result of:

$ rpm -qa | grep -i wx
$ ls -l /usr/bin/wx*

Cheers!

[hamish]

Phoenix,

Here's the output:

$ rpm -qa | grep -i wx
wxGTK-devel-2.4.2-1
wxGTK-2.4.2-1
wxBase-2.4.2-1

$ls -l /usr/bin/wx*
-rwxr-xr-x    1 root     root         4864 Nov 28  2003 /usr/bin/wxbase-2.4-config
lrwxrwxrwx    1 root     root           26 Mar 27 23:58 /usr/bin/wxbase-config -> /usr/bin/wxbase-2.4-config
-rwxr-xr-x    1 root     root       397420 Jul 21 07:54 /usr/bin/wxcas
lrwxrwxrwx    1 root     root           25 Mar 27 23:58 /usr/bin/wx-config -> /usr/bin/wxgtk-2.4-config
-rwxr-xr-x    1 root     root         5159 Sep 21  2003 /usr/bin/wxgtk-2.4-config

Cheers,

Hamish

[phoenix]

hamish,

Your wx configuration seems to be ok.
Try this:

$ mv ~/.eMule ~/.eMule.bak
$ mv ~/.aMule ~/.aMule.bak
$ amule

and see if it still locks.

Cheers!

[roof99]

hi !
i have the same problem, after udgrading amule 1.2.8 to 2.0.0rc5 i can't run  amule (gui)

after gdb:

Initialising aMule
Userhash loaded: 9DCE43544C0ED7E0570F4646C8746F28
[New Thread 27130800 (LWP 2790)]
013.part is 0-size, not added
003.part is 0-size, not added
004.part is 0-size, not added
015.part is 0-size, not added
001.part is 0-size, not added
024.part is 0-size, not added
007.part is 0-size, not added
004.part is 0-size, not added
001.part is 0-size, not added
029.part is 0-size, not added
002.part is 0-size, not added
001.part is 0-size, not added
018.part is 0-size, not added
003.part is 0-size, not added
019.part is 0-size, not added
001.part is 0-size, not added
005.part is 0-size, not added
016.part is 0-size, not added
002.part is 0-size, not added
005.part is 0-size, not added
021.part is 0-size, not added
003.part is 0-size, not added
011.part is 0-size, not added
025.part is 0-size, not added
004.part is 0-size, not added
002.part is 0-size, not added
006.part is 0-size, not added
019.part is 0-size, not added
005.part is 0-size, not added
001.part is 0-size, not added
001.part is 0-size, not added
008.part is 0-size, not added
003.part is 0-size, not added
027.part is 0-size, not added
005.part is 0-size, not added
001.part is 0-size, not added
017.part is 0-size, not added
010.part is 0-size, not added
003.part is 0-size, not added
002.part is 0-size, not added
003.part is 0-size, not added
filters.txt is 0-size, not added
002.part is 0-size, not added
007.part is 0-size, not added
001.part is 0-size, not added
010.part is 0-size, not added
*** UDP socket at 4665
*** TCP socket at 4662
*** UDP socket at 4672
 
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -151073984 (LWP 2787)]
0x00e84cd6 in _int_malloc () from /lib/tls/libc.so.6
(gdb) where
#0  0x00e84cd6 in _int_malloc () from /lib/tls/libc.so.6
#1  0x00e8409d in malloc () from /lib/tls/libc.so.6
#2  0x008ad08e in operator new () from /usr/lib/libstdc++.so.5
#3  0x0817d363 in CClientCreditsList::LoadList ()
#4  0x0817cb3e in CClientCreditsList::CClientCreditsList ()
#5  0x082bbd18 in CamuleApp::OnInit ()
#6  0x00b82091 in wxEntry () from /usr/lib/libwx_gtk-2.4.so.0
#7  0x082b95ec in main ()

 rpm -qa | grep -i wx
wxGTK-devel-2.4.2-1
wxBase-2.4.2-1
wxGTK-2.4.2-1

 ls -l /usr/bin/wx*
lrwxrwxrwx  1 root root     25 Sep 14 21:11 /usr/bin/wx-config -> /usr/bin/wxgtk-2.4-config
-rwxr-xr-x  1 root root   4864 Nov 28  2003 /usr/bin/wxbase-2.4-config
lrwxrwxrwx  1 root root     26 Sep 14 21:12 /usr/bin/wxbase-config -> /usr/bin/wxbase-2.4-config
-rwxr-xr-x  1 root root 380832 Jul 21 10:28 /usr/bin/wxcas
-rwxr-xr-x  1 root root   5159 Sep 21  2003 /usr/bin/wxgtk-2.4-config

10x in  advance
can i return to old version 1.2.8 without to loss my  downloaded data in amule?

[hamish]

Hi Phoenix,

Thanks for your response.  I ended up removing rc5 and installing 1.2.8 instead. It seems to be working fine now, although I have a LowID problem I haven't been able to fix, but that's another story!

Thanks again for your help.

Best wishes,

Hamish

[Kry]

RC6 will fix all this problems. I made some special coding today to avoid those startup crashes.