aMule Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

We're back! (IN POG FORM)

Pages: [1] 2

Author Topic: Low ID agian.... :-(  (Read 8163 times)

cenobite

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 12
Low ID agian.... :-(
« on: June 11, 2005, 02:48:06 PM »
HI !
Some months ago (after hours making aMule even start in Mandrake 10 community) I made aMule work with high ID after some router configurations. I upgraded to mandrake 10 official, later to 10.1 official. Still working with High ID...  But after upgrading to LE2005 something happend, I now got Low ID ? It says I'm probebly "behind a router or firewall". The thing is I allways have !!! It worked before ? I've checked the mandriva firewall, and it's turned off. My router is still setup with the tcp 4662 in virtual server, and I also checked what programs are running while aMule is started, but can't find anything firewall related programs running.... ?? I know LE2005 comes shipped with guarddog and I also downloaded KlamAV and firestarter lately, but I don't think any of those are running while using aMule....
Anything I've missed here ?

Thanx !

Ole
Logged

xit

  • Jr. Member
  • **
  • Karma: 0
  • Offline Offline
  • Posts: 50
Re: Low ID agian.... :-(
« Reply #1 on: June 12, 2005, 12:18:45 PM »
May be you could use this wiki page to test if your 4662 is reachable :
http://www.amule.org/testport.php

xit.
Logged

cenobite

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 12
Re: Low ID agian.... :-(
« Reply #2 on: June 14, 2005, 11:51:55 AM »
HI !

Yes, I've tested the 4662 port. It's not reachable. That's why I can't get aMule to work with high ID..... I've also checked my router again, and it is still configured with the tcp 4662-4665 (service port), map to my IP in virtual server setup.

Thanx  !

Ole
Logged

volpol

  • Evil KDE Hater
  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 43
Re: Low ID agian.... :-(
« Reply #3 on: June 14, 2005, 02:26:22 PM »
check if you really don't have a firewall enabled. for an iptables based one
Code: [Select]
iptables -L -n(as root) should give you some information.
Logged

stefanero

  • Some Support
  • Developer
  • Hero Member
  • *****
  • Karma: 8
  • Offline Offline
  • Posts: 4235
Re: Low ID agian.... :-(
« Reply #4 on: June 14, 2005, 03:14:24 PM »
your that your ip is still teh same as in the router setup?
maybe after upgrade to LE you know have dhcp enabled...and so you dont have a static ip anymore.

also maybe your ISP might be blocking port 4662 since a couple days, I recommend maybe switching to a completly different port, if you are really sure that IP-address and ports are setup correct in the router and mandriva firewall is off

stefanero
Logged
In its default setup, Windows XP on the Internet amounts to a car
parked in a bad part of town, with the doors unlocked, the key in
the ignition and a Post-It note on the dashboard saying, "Please
don't steal this."

cenobite

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 12
Re: Low ID agian.... :-(
« Reply #5 on: June 14, 2005, 11:51:42 PM »
Yo !

I ran "iptables -L -n", but can't get anything out of it......Could someone figure it out for me if I post it here ? I haven't tried other ports yet. I mean, Is there other alternatives than 4662-4665 ? The IP adress is the same as before....  I'm pretty sure something changed in the network configuration somewhere when upgrading to LE2005.....

I also see that I have the 2.0.0rc7 version of aMule. I should make an update anyway....

Thanx  !

Ole
Logged

cenobite

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 12
Re: Low ID agian.... :-(
« Reply #6 on: June 15, 2005, 12:03:10 AM »
Just made an upgrade. That didn't do it.
Now running aMule 2.0.2
Logged

stefanero

  • Some Support
  • Developer
  • Hero Member
  • *****
  • Karma: 8
  • Offline Offline
  • Posts: 4235
Re: Low ID agian.... :-(
« Reply #7 on: June 15, 2005, 08:16:55 AM »
just post the iptables -L output here...we can figure it out if its ok or not ;)
Logged
In its default setup, Windows XP on the Internet amounts to a car
parked in a bad part of town, with the doors unlocked, the key in
the ignition and a Post-It note on the dashboard saying, "Please
don't steal this."

cenobite

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 12
Re: Low ID agian.... :-(
« Reply #8 on: June 15, 2005, 10:43:45 PM »
Hi, there !

OK, here it goes !!    :-)

[ole@minlinuxboks ~]$ su
Password:
[root@minlinuxboks ole]# iptables -L
Chain INPUT (policy DROP)
target     prot opt source               destination
ACCEPT     tcp  --  192.168.1.XXX        anywhere            tcp flags:!SYN,RST,
ACK/SYN
ACCEPT     udp  --  192.168.1.XXX        anywhere
ACCEPT     all  --  anywhere             anywhere
ACCEPT     icmp --  anywhere             anywhere            limit: avg 10/sec b
urst 5
DROP       all  --  anywhere             255.255.255.255
DROP       all  --  anywhere             255.255.255.255
DROP       all  --  BASE-ADDRESS.MCAST.NET/8  anywhere
DROP       all  --  anywhere             BASE-ADDRESS.MCAST.NET/8
DROP       all  --  255.255.255.255      anywhere
DROP       all  --  anywhere             0.0.0.0
DROP       all  --  anywhere             anywhere            state INVALID
LSI        all  -f  anywhere             anywhere            limit: avg 10/min b
urst 5
INBOUND    all  --  anywhere             anywhere
LOG_FILTER  all  --  anywhere             anywhere
LOG        all  --  anywhere             anywhere            LOG level info pref
ix `Unknown Input'

Chain FORWARD (policy DROP)
target     prot opt source               destination
ACCEPT     icmp --  anywhere             anywhere            limit: avg 10/sec b
urst 5
LOG_FILTER  all  --  anywhere             anywhere
LOG        all  --  anywhere             anywhere            LOG level info pref
ix `Unknown Forward'

Chain OUTPUT (policy DROP)
target     prot opt source               destination
ACCEPT     tcp  --  192.168.1.XXX        192.168.1.XXX       tcp dpt:domain
ACCEPT     udp  --  192.168.1.XXX        192.168.1.XXX       udp dpt:domain
ACCEPT     all  --  anywhere             anywhere
DROP       all  --  BASE-ADDRESS.MCAST.NET/8  anywhere
DROP       all  --  anywhere             BASE-ADDRESS.MCAST.NET/8
DROP       all  --  255.255.255.255      anywhere
DROP       all  --  anywhere             0.0.0.0
DROP       all  --  anywhere             anywhere            state INVALID
OUTBOUND   all  --  anywhere             anywhere
LOG_FILTER  all  --  anywhere             anywhere
LOG        all  --  anywhere             anywhere            LOG level info pref
ix `Unknown Output'

Chain INBOUND (1 references)
target     prot opt source               destination
ACCEPT     tcp  --  anywhere             anywhere            state RELATED,ESTAB
LISHED
ACCEPT     udp  --  anywhere             anywhere            state RELATED,ESTAB
LISHED
LSI        all  --  anywhere             anywhere

Chain LOG_FILTER (5 references)
target     prot opt source               destination

Chain LSI (2 references)
target     prot opt source               destination
LOG_FILTER  all  --  anywhere             anywhere
LOG        tcp  --  anywhere             anywhere            tcp flags:SYN,RST,A
CK/SYN limit: avg 1/sec burst 5 LOG level info prefix `Inbound '
DROP       tcp  --  anywhere             anywhere            tcp flags:SYN,RST,A
CK/SYN
LOG        tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,R
ST,ACK/RST limit: avg 1/sec burst 5 LOG level info prefix `Inbound '
DROP       tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,R
ST,ACK/RST
LOG        icmp --  anywhere             anywhere            icmp echo-request limit: avg 1/sec burst 5 LOG level info prefix `Inbound '
DROP       icmp --  anywhere             anywhere            icmp echo-request
LOG        all  --  anywhere             anywhere            limit: avg 5/sec burst 5 LOG level info prefix `Inbound '
DROP       all  --  anywhere             anywhere

Chain LSO (0 references)
target     prot opt source               destination
LOG_FILTER  all  --  anywhere             anywhere
LOG        all  --  anywhere             anywhere            limit: avg 5/sec burst 5 LOG level info prefix `Outbound '
REJECT     all  --  anywhere             anywhere            reject-with icmp-port-unreachable

Chain OUTBOUND (1 references)
target     prot opt source               destination
ACCEPT     icmp --  anywhere             anywhere
ACCEPT     tcp  --  anywhere             anywhere            state RELATED,ESTABLISHED
ACCEPT     udp  --  anywhere             anywhere            state RELATED,ESTABLISHED
ACCEPT     all  --  anywhere             anywhere
[root@minlinuxboks ole]#

I just added some X's were I think they should be ;-)

Thanx again !

Ole
Logged

karamazof

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 7
  • La vie ne vaut rien mais vivre c'est hors de prix
almost the same problem
« Reply #9 on: June 16, 2005, 01:04:23 PM »
Hi, I'm new to this forum... nice to meet you all

I have been searching for a while for similar problems about my amule, but of course my search wans't exhaustif.
My low id problem doesn't seem to come from my router, as my 4662 port is accesible from outside, and I have linked the router's 4662 port to the server's 4662 port tcp (and 4672 udp), my firewall is actually open to everything (just until I solve my problem).
even other services can acces 4662 port in both directions and by analysing what's going on with ethereal, everything SEEMS ok...
I just can't understand.
EDIT: I also tried changing tcp port to 80, no changes
« Last Edit: June 16, 2005, 01:07:11 PM by karamazof »
Logged

karamazof

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 7
  • La vie ne vaut rien mais vivre c'est hors de prix
Re: Low ID agian.... :-(
« Reply #10 on: June 16, 2005, 01:10:36 PM »
ow damn it, I have partially solved the problem...
running amule a root...
Logged

stefanero

  • Some Support
  • Developer
  • Hero Member
  • *****
  • Karma: 8
  • Offline Offline
  • Posts: 4235
Re: Low ID agian.... :-(
« Reply #11 on: June 16, 2005, 01:58:00 PM »
@    cenobite

can you run this as a script and root user:
make sure iptables is in path when you do it...

Code: [Select]
#!/bin/bash

echo -n "Shutting down firewall"
#flush all rules
iptables -F
iptables -X
#resettting to default policy
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT

when its done, restart amule and see if you have highID

stefanero
Logged
In its default setup, Windows XP on the Internet amounts to a car
parked in a bad part of town, with the doors unlocked, the key in
the ignition and a Post-It note on the dashboard saying, "Please
don't steal this."

stefanero

  • Some Support
  • Developer
  • Hero Member
  • *****
  • Karma: 8
  • Offline Offline
  • Posts: 4235
Re: Low ID agian.... :-(
« Reply #12 on: June 16, 2005, 01:59:35 PM »
@karamazof

if you have to run it as root, something in your setup is wrong...
and as a normal user you cannot use port80 since this is only availible as root user, but you should be able to run amule on high ports without problems, just check your firewall(s)
Logged
In its default setup, Windows XP on the Internet amounts to a car
parked in a bad part of town, with the doors unlocked, the key in
the ignition and a Post-It note on the dashboard saying, "Please
don't steal this."

karamazof

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 7
  • La vie ne vaut rien mais vivre c'est hors de prix
Re: Low ID agian.... :-(
« Reply #13 on: June 16, 2005, 07:00:21 PM »
Hi, I tried port 35555 and it seems to work fine.
Thankyou for your help,
Logged

cenobite

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 12
Re: Low ID agian.... :-(
« Reply #14 on: June 16, 2005, 10:37:48 PM »
Hi folks !

I will try some of the sugestions above.

Thanx guys ! keep it up :-)
I will not give it up until this darn thing runs like ..eh.... my cpu fan.... ? (it's a darn good cpu fan) !!  hehe

Will post what happend later. Will also try aMule as root since many people has done this with positive feedback ! Which I know isn't a good thing, but I'm a bit longer on my quest for a better working aMule :-)

Ole
Logged
Pages: [1] 2
« previous next »