aMule Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

We're back! (IN POG FORM)

Author Topic: Password problem on openslug  (Read 5828 times)

provat

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 10
Password problem on openslug
« on: March 31, 2006, 06:16:47 AM »
Hi,
I have installed amule from http://www.telefonica.net/web2/deb/amulefeed/
on my openslug nslu2.
amule and amuleweb is starting properly and I even have access on it's webpage on port 4711.
But I can't log in.
What is the way to install md5sum on a nslu2?
And what is the password?
In amule.conf, I have already put hexadecimal passwords(found on wiki.amule), but when I try to put on webinterface, it won't work.
What is the solution.

Thanks
« Last Edit: March 31, 2006, 06:18:41 AM by provat »
Logged

TheOnlyFish

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 33
Re: Password problem on openslug
« Reply #1 on: March 31, 2006, 07:43:03 AM »
Follow these instructions in the wiki to configure amuled and the web-interface.
Logged

stefanero

  • Some Support
  • Developer
  • Hero Member
  • *****
  • Karma: 8
  • Offline Offline
  • Posts: 4235
RE: Password problem on openslug
« Reply #2 on: March 31, 2006, 07:59:05 AM »
Quote
Originally posted by provat
Hi,
I have installed amule from http://www.telefonica.net/web2/deb/amulefeed/
on my openslug nslu2.
amule and amuleweb is starting properly and I even have access on it's webpage on port 4711.
But I can't log in.
What is the way to install md5sum on a nslu2?
And what is the password?
In amule.conf, I have already put hexadecimal passwords(found on wiki.amule), but when I try to put on webinterface, it won't work.
What is the solution.

Thanks

hexadecimal password!?!?!!?!  8o which page sais that?????

you can also use another linux mashine to calculate teh md5sum pass ( if openslug does not have md5sum command)

do you start amuleweb seperatly or together with amule?

have you tryed clearing teh cooki of the browser you use?
Logged
In its default setup, Windows XP on the Internet amounts to a car
parked in a bad part of town, with the doors unlocked, the key in
the ignition and a Post-It note on the dashboard saying, "Please
don't steal this."

provat

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 10
RE: Password problem on openslug
« Reply #3 on: March 31, 2006, 08:28:23 AM »
Hi Theonly fish and stefanero,
Thanks for quick response. I used the password found in wiki as 56f491c56340a6fa5c158863c6bfb39f. As it contains the characters upto "f", I called it hexadecimal numbers. Well I don't know, may be I am wrong.
I am using a windows xp machine with Putty.exe installed to communicate in ssh with nslu2; So I don't know about calculating md5sum will be possible or not.
The amuleweb starts automatically even after rebooting nslu2. As I have always access on port 4711.So I don't use the command /etc/init.d/amule start. The browser I use is mozilla firefox.

Still I will retry as the wiki says with a fresh reinstallation.

Thanks again
« Last Edit: March 31, 2006, 08:42:44 AM by provat »
Logged

thedude0001

  • evil bugfinder ;)
  • Hero Member
  • *****
  • Karma: 6
  • Offline Offline
  • Posts: 827
Re: Password problem on openslug
« Reply #4 on: March 31, 2006, 08:40:57 AM »
Are you sure you don't have md5sum on that box? I somehow doubt there's a distro out there which doesn't install this by default...
Logged
Das Schlimme auf dieser Welt ist
daß die Dummen so selbstsicher sind
und die Gescheiten so voller Zweifel.

TheOnlyFish

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 33
Re: Password problem on openslug
« Reply #5 on: March 31, 2006, 08:46:10 AM »
A new installation is not necessary.

But amuled and amuleweb must have the proper password. The password for amuled must be set in amule.conf, for amuleweb in remote.conf. These applications read it encoded in MD5 (for security reasons), so you have to encode your chosen password in MD5 by using md5sum (as described in the wiki link).

If you are unsure whether md5sum is installed at your machine, type
Code: [Select]
whereis md5sum at your console (ssh in your case).
Logged

Ramiro

  • Jr. Member
  • **
  • Karma: 1
  • Offline Offline
  • Posts: 71
Re: Password problem on openslug
« Reply #6 on: March 31, 2006, 09:23:11 AM »
md5sum is included in busybox in openslug-beta. In unstable is in coreutils.
It's installed by default.
Logged

provat

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 10
Re: Password problem on openslug
« Reply #7 on: April 02, 2006, 09:22:54 AM »
Thanks a lot Ramiro and everybody.
It works like a charm when I used the command like in suse
echo -n password | md5sum | cut -d " " -f 1

My last question is do I have to use "screen" when I log out/switch off my pc or
Putty to make it run independently?
Don't mind for my question as I am a newcomer in linux(so may be it sounds stupid). But still I have a great success to run openslug. Planning in future to move to debian distro.
Thanks again.
« Last Edit: April 02, 2006, 09:25:18 AM by provat »
Logged

stefanero

  • Some Support
  • Developer
  • Hero Member
  • *****
  • Karma: 8
  • Offline Offline
  • Posts: 4235
Re: Password problem on openslug
« Reply #8 on: April 02, 2006, 09:45:18 AM »
amuleweb --help

the option for sending amuleweb to background is

-q &

for amuled is -f or & aswell
Logged
In its default setup, Windows XP on the Internet amounts to a car
parked in a bad part of town, with the doors unlocked, the key in
the ignition and a Post-It note on the dashboard saying, "Please
don't steal this."

provat

  • Approved Newbie
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 10
Re: Password problem on openslug
« Reply #9 on: April 02, 2006, 09:53:47 AM »
Thanks a lot stefanero for such a quick response. I will try it.
Logged