Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[djkno3]

I'm running a new install of fedora 1.0 here is the wx rpms I have installed
$ rpm -qa | grep -i wx
wxBase-2.4.2-1
wxGTK-2.4.2-1
wxGTK-devel-2.4.2-1
I got them off of the sourceforge site for the project. I first installed wx base and then wxGTK and then the dev's (tried to compile it and got a WHOLE lot of warnings and errors)  I *had* it running on rh 9.0 with the rpms but not this one.  oh the amule  rpm I used was
amule-1.2.4-2.fr this is the back trace

[0] amule [0x81a1e11]
[1] /usr/lib/libwx_gtk-2.4.so.0(wxFatalSignalHandler+0x26) [0x6352082]
[2] /lib/libpthread.so.0 [0xb8c44d]
[3] /lib/libc.so.6 [0x931c38]
[4] /lib/libc.so.6(__libc_free+0x68) [0x971ea4]
[5] amule [0x80ddae9]
[6] amule [0x81a36cc]
[7] amule [0x819e4c2]
[8] /usr/lib/libwx_gtk-2.4.so.0(_Z7wxEntryiPPc+0x1f9) [0x61ed1d1]
[9] amule [0x819db7b]
[10] /lib/libc.so.6(__libc_start_main+0xac) [0x920b84]
[11] amule(_ZN18wxBaseArrayPtrVoidD2Ev+0x39) [0x8062021]

any ideas? xmule gives the same errors...

[deltaHF]

Originally posted by djkno3

I got them off of the sourceforge site for the project. I first installed wx base and then wxGTK and then the dev's (tried to compile it and got a WHOLE lot of warnings and errors)

.....

 oh the amule  rpm I used was
amule-1.2.4-2.fr this is the back trace

hi,

how did u installed the wxGTK rpms ? rpm -i or rpm -Uvh ?
ls -l /usr/bin/wx* ?
why don't u use the amule fc1 rpm from our dl page ?
poste the compiler errors plz

greets

[djkno3]

*note I used the rpm off of this website and it worked (used the one off fresh rpm's before)
I installed them through the gui (defaults to -i if I remember correctly)
output from the ls comand
$ ls -l /usr/bin/wx*
-rwxr-xr-x    1 root     root         4864 Nov 28 13:08 /usr/bin/wxbase-2.4-config
lrwxrwxrwx    1 root     root           17 Jan 19 11:30 /usr/bin/wx-config -> wxbase-2.4-config
-rwxr-xr-x    1 root     root         5159 Sep 21 15:14 /usr/bin/wxgtk-2.4-config
 I attached the configure output but I don't know how to get the output from the make command... I tried "make > make.txt" but that didn't give me the right one (I know a *bit* about Linux but not a great deal)

[Kry]

lrwxrwxrwx 1 root root 17 Jan 19 11:30 /usr/bin/wx-config -> wxbase-2.4-config


you didn't do the "ln" that's on installation howto.

[deltaHF]

http://www.amule.org/amule/howto.php

[djkno3]

I don't have a "Ln" or a "In" *made it a capital so you could tell it apart.  Where is this located? I su'd and niether would work and I looked in the sbin dir and still nothing...

[deltaHF]

as root

ln -sf /usr/bin/wxgtk-2.4-config /usr/bin/wx-config
ln -sf /usr/bin/wxbase-2.4-config /usr/bin/wxbase-config
ldconfig

[djkno3]

ok I've done that now and I get further but still haveing problems
-snip
 -c -o amule-FileDetailDialog.o `test -f 'FileDetailDialog.cpp' || echo './'`FileDetailDialog.cpp; \
then mv ".deps/amule-FileDetailDialog.Tpo" ".deps/amule-FileDetailDialog.Po"; \
else rm -f ".deps/amule-FileDetailDialog.Tpo"; exit 1; \
fi
 
cc1plus
:
 
No
 
such
 
file
 
or
 
directory
:
 
opening
 
dependency
 
file
 
.deps/amule-FileDetailDialog.Tpo
make[2]: *** [amule-FileDetailDialog.o] Error 1
make[2]: Leaving directory `/root/.Trash/aMule-1.2.4/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/.Trash/aMule-1.2.4'
make: *** [all] Error 2

[deltaHF]

your attachment seems to be ok.. did u rerun configure after u linked wx-config correct or just did make ?

and why compiling amule as root ?!?

[djkno3]

thank you very much for your time today and quick answers after I switched out of root and back to a normal user account it compiled fine